Knowledge Base

PowerConnect - PC8024F lag error issue

Configuring a LAG on PC8024F without a transceiver or DAC cable connected, fails with the following error.

console(config-if-Te1/0/18)#channel-group 4 mode active

Error! LAG members do not have same speed, duplex or auto-negotiation settings.

Transceivers or DAC cables should be connected before configuring the LAG.

Article ID: SLN294201

Last Date Modified: 06/28/2016 09:52 AM

Rate this article

Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.