Base de conhecimento

Replacing the Keyboard on a Dell Latitude E6420


Article Summary: "This article will illustrate the process of removing and replacing the keyboard on a Dell Latitude E6420 and provide additional resources to aid in this process."





Table of Contents

Table of Contents:

  1. Overview
  2. Before you Begin
  3. Removing and Installing your Keyboard
  4. Returning Parts to Dell
  5. Additional resources

Overview

This article will walk you through the process of replacing the keyboard on your Dell Latitude E6420. First, it will identify the steps that need to be taken before you begin, and the tools you will need to replace the keyboard. Next, it will provide a step by step walkthrough on how to remove the current keyboard, and how to install the replacement keyboard you received. Third, it may be necessary to return the keyboard to Dell, and there are instructions included for the return. Finally, some additional resources are included should you have further questions.


Before you begin

  1. During installation or removal of any hardware, always ensure that all data is backed up properly.
  2. Disconnect any telephone, network, video or USB cables from the computer.
  3. If the laptop is being used in a docking station, undock the system.
  4. Disconnect the AC adapter from the system.
  5. Remove the battery from the system.
  6. Hold the power button in for 5 seconds to drain any residual power from the system.

Back to Top


Removing and Installing your keyboard

Caution: To avoid electrostatic discharge (ESD), ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.

Learn how to Avoid ESD Damage

Removing and Installing your Keyboard

  1. Remove the keyboard trim by gently lifting up the edges using the plastic scribe tool.
  2. Remove the two securing screws directly below the battery on the bottom of the system.
  3. Remove the four screws at the bottom of the keyboard above the touchpad.
  4. Gently flip the keyboard over.
  5. Lift the cable securing latch up with the plastic scribe tool.
  6. Gently disconnect the cable and remove the keyboard from the system.

Installing your keyboard

  1. Connect the keyboard cable.
  2. Press the cable securing clip down so that it is clipped into place.
  3. Flip the keyboard upright and slide it downwards into place.
  4. Replace the four screws at the bottom of the keyboard.
  5. Replace the keyboard trim and press down until it snaps into place.
  6. Replace the two securing screws on the bottom of the system.
  7. You can now reinstall the battery and reconnect the AC adapter.

Back to Top


Returning parts to Dell

Learn How to Return the Keyboard to Dell

Back to Top


Additional resources

Service Manual

Back to Top



ID do artigo: HOW10494

Data da última modificação: 03/27/2017 04:59 PM


Rate this article

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
Sim Não
Envie seus comentários
Os comentários não podem conter estes caracteres especiais: <>()\
Infelizmente, o nosso sistema de feedback está atualmente desativado. Tente novamente mais tarde.

Agradecemos o feedback.