Databáza poznatkov

Dell S2240T Touch Monitor Issues

This article provides information on "S2240T Touch Monitor Issues".

Table of Contents:

Touch Report Error

You may experience touch function miss alignment or no touch function:
  • Ensure power cord comes with ground pin.
  • Unplug and re-plug the DC cable from power adapter to allow touch module auto recalibration.
  • Ensure to use Dell provided USB cable, connect with computer.
  • Ensure computer support USB 2.0 cable.
  • If the device cannot be detected by system, power off/on the monitor or plug out/in the USB cable.
Back to Top

Touch Screen No Response in Saving Mode

If the monitor or the computer does not wake up by touching in Safe Mode, follow the steps as mentioned below:
  • Access Device Manager and choose HID Interface Device under Human Interface Devices.
  • Right Click on HID - compliant device and Select Properties.
  • Under Power Management tab, ensure "Allow the device to wake the computer" is selected.
Back to Top

Cursor moved erratically

The cursor does not accurately follow your finger when you touch the screen.
  • Enter Control Panel to choose Tablet PC Settings.
  • Select Calibration.
  • Recalibrate your screen following the text on the screen.
  • Save or give up the calibrate data.
Back to Top

Identifikátor článku: SLN129798

Dátum poslednej zmeny: 02/10/2016 02:37 PM

Ohodnotiť tento článok

Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
Áno Nie
Pošlite nám pripomienky.
Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\
Ľutujeme, náš systém odosielania pripomienok je momentálne nefunkčný. Skúste znova neskôr.

Ďakujeme vám za pripomienky.