Knowledge Base

E3 Battery Slice Backward Compatibility



Article Summary: Info on backward compatibility with older Latitude systems.


Table of Contents :

  1. Battery Slice Compatibility

Battery Slice Compatibility

E3 batteries are not backward compatible with E1/E2 systems.

With that change, although the slice batteries can physically plugged into E1/E2 systems via dock connector, the batteries still cannot work. Warning message will be displayed when the user tries to dock the battery slice.

The warning message that will be displayed:

The battery slice battery attached to your Dell notebook is not supported by this model. Please detach the slice battery to reduce the weight of your system.

Example E3: E6420, E6520, E5520 etc...

Example E2: E6410, E6510, E5510 etc...

Example E1: E6400, E6500, E5500 etc...


If you require further assistance or wish to give us feedback, please engage our technical team on Twitter.




Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Article ID: SLN265748

Last Date Modified: 06/03/2015 05:41 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.