Consulta de temas

How to Clean the Drum on the 1815dn Dell Laser Printer


Article Summary: This article provides information on "How to Clean the Drum on the 1815dn Dell Laser Printer"


Table of Contents:

  1. How to Clean the Drum on the 1815dn Dell Laser Printer


1. How to Clean the Drum on the 1815dn Dell Laser Printer

If there are streaks or spots on your print, the Organic Photo Conductor (OPC) drum of the toner cartridge may require cleaning.

  1. Before setting the cleaning procedure, make sure that paper is loaded in the paper tray.
  2. Press the Left or Right arrow to highlight Menu and press the Checkmark button.
  3. Press the Left or Right arrow to highlight Maintenance and press the Checkmark button.
    The first available menu item, Clean Drum, displays.
  4. Press the Checkmark button twice.
    The display confirms your selection.
    The printer prints out a cleaning page. Toner particles on the drum surface are affixed to the paper.
  5. If the problem remains, repeat steps 3 through 4 until toner particles are not affixed to the paper.
Back to Top


Click the button below to Tweet feedback or request assistance on anything in the above article.

 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identificación del artículo: SLN288638

Última fecha de modificación: 01/15/2014 12:00 AM


Califique este artículo

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
No
Envíenos sus comentarios
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"
Disculpe, nuestro sistema de comentarios está actualmente inactivo. Vuelva a intentarlo más tarde.

Muchas gracias por sus comentarios.