Consulta de temas

How to perform a role installation on Windows Server 2012 R2



Article Summary: This article is designed to provide instructions on how to perform a role installation on Windows Server 2012 R2


Solution:

In this example the Active Directory Domain Services (ADDS) role will be installed. Follow the steps in the solution to achieve this goal.

1. Install the ADDS role on a server running Windows Server 2012 R2.


a. Open Server Manager by pressing Windows Logo+R, type servermanager.exe and press Enter. The same task can be accomplished by pressing Windows Logo and selecting Server Manager on the left side of the screen.




b. Click Add roles and features in the Dashboard under Configure this local server.

c. Click Next on Before You Begin.




d. Select Role-based or feature-based installation for Installation Type and click Next.




e. Select W12R2-DC on the Server Selection page and click Next.

Note: Substitute the name of the server for W12R2-DC on step e.



f. Click Active Directory Domain Services to install it, click Add Features when prompted and click Next.




g. Click Next on Features.




h. Click Next on ADDS.




i. Click Install on Confirmation.







Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identificación del artículo: SLN290597

Última fecha de modificación: 06/29/2015 03:59 PM


Califique este artículo

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
No
Envíenos sus comentarios
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"
Disculpe, nuestro sistema de comentarios está actualmente inactivo. Vuelva a intentarlo más tarde.

Muchas gracias por sus comentarios.