Knowledge Base

Interpreting LCD and Embedded Diagnostic (ePSA) event messages


The server LCD presents an error message, or an error message is generated when running the Enhanced Pre-Boot System Assessment (ePSA).



Refer to: Dell Event Message Reference

The Event Message Reference contains the error and event information generated by firmware and other agents that monitor system components. These events might be logged, presented to the user on one of the system management consoles, or both logged and displayed.

Additional Information:

To run the Embedded System Diagnostics (also known as Enhanced Pre-Boot System Assessment).
  1. As the system boots, press <F11>.
  2. Use the up and down arrows keys to select System Utilities -> Launch Dell Diagnostics


Artikel-id: SLN288656

Laatste wijzigingsdatum: 04/04/2017 05:33 PM


Beoordeel dit artikel

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
Ja Nee
Stuur ons feedback
Opmerkingen mogen geen speciale tekens bevatten: <>() \
Excuses, ons feedbacksysteem is momenteel offline. Probeert u het later nog eens.

Hartelijk dank voor uw feedback.