Base de conhecimento

Connecting 3 Monitors to an Optiplex 3010 with an AMD Radeon 7470 Video Card



Article Summary: This article contains steps to configure 3 monitors on an OptiPlex 3010 utilizing the integrated video solution and a AMD Radeon 7470 add-in video card


Scenario

Users may wish to utilize 3 monitors with their OptiPlex 3010, and with an AMD Radeon 7470, this configuration is supported.


Configuration

The AMD Radeon 7470 video card has the following connectors:

The connectors on the rear of an OptiPlex 3010 (desktop chassis shown):

Follow these steps to configure 3 monitors:

Example of a VGA cable and port:


Example of a DVI-D cable and port:


Example of a DisplayPort cable and port:


  1. Connect the Primary Monitor to the VGA connector on the system (this is the integrated video solution)
  2. Connect the Secondary Monitor 1 to either the DVI-D or DisplayPort connector on the AMD Radeon 7470 video card (this is the add-in video solution)
  3. Connect the Secondary Monitor 2 to the remaining connector on the AMD Radeon 7470 video card

All 3 monitors should now be available to either extend or duplicate the desktop at the users preference





ID do artigo: SLN286121

Data da última modificação: 03/27/2017 12:56 PM


Classifique este artigo

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
Sim Não
Envie seus comentários
Os comentários não podem conter estes caracteres especiais: <>()\
Infelizmente, o nosso sistema de feedback está atualmente desativado. Tente novamente mais tarde.

Agradecemos o feedback.