Knowledge Base

OptiPlex 360 Removal Guide Index For Customer Replaceable Parts (CRU)


Article Summary: This article provides information on how to safely remove the customer replaceable units (CRUs)on the Dell OptiPlex 360


Table of Contents:
  1. Removal Guides
  2. The Mini Tower (MT) Chassis
  3. The Desktop (DT) Chassis




1.


Removal Guide



These guides will take you step by step through the safe removal of what are considered to be the Customer Replaceable Unit (CRU) parts of the Various OptiPlex 360 systems. (CRUs are the parts of the system that shouldn't need an engineer to remove or replace.)

The guides will also include pictures to reference what's involved.

If these guides do not cover what you are looking to do, then you will want to reference your System Manual.

Back to Top




2.


The Mini Tower (MT) Chassis




Back to Top


3.


The Desktop (DT) Chassis




Back to Top


If you require further assistance or wish to give us feedback, please engage our technical team on Twitter.



 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Article ID: SLN289069

Last Date Modified: 03/19/2014 12:00 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Feedback shows invalid character, not accepted special characters are <> () &#92;
Sorry, our feedback system is currently down. Please try again later.

Thank you. Your feedback has been sent.