Consulta de temas

How To Replace The Imaging Unit On The B2360d / B2360dn Dell Laser Printer


Table of Contents:

  1. Replacing The Imaging Unit

This article provides information on "How To Replace The Imaging Unit On The B2360d / B2360dn Dell Laser Printer"


1. Replacing The Imaging Unit

  1. Press the button on the right side of the printer, and then open the front door.


  2. Pull the toner cartridge out using the handle.


  3. Lift the blue handle, and then pull the imaging unit out of the printer.


  4. Unpack the new imaging unit, and then shake it.


  5. Remove all packing materials from the imaging unit.
    WARNING: Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.

    Do not touch the photoconductor drum. Doing so may affect the print quality of future print jobs.


  6. Insert the imaging unit into the printer by aligning the arrows on the side rails of the imaging unit with the arrows on the side rails inside the printer.


  7. Insert the toner cartridge into the printer by aligning the side rails of the cartridge with the arrows on the side rails inside the printer.


  8. Close the front door.

More info can be found in the B2360d User’s Guide or the B2360dn User’s Guide.

If these steps do not correct the problem, please contact Dell Technical Support.

Back to Top



Identificación del artículo: SLN288611

Última fecha de modificación: 07/30/2015 03:28 PM


Califique este artículo

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
No
Envíenos sus comentarios
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"
Disculpe, nuestro sistema de comentarios está actualmente inactivo. Vuelva a intentarlo más tarde.

Muchas gracias por sus comentarios.