Consulta de temas

How configure Exchange server to allow anonymous relay

Article Summary: This article provides information on configuring Exchange server to allow anonymous relay.

How to create and configure a relay connector in Exchange server.

We first need to create the connector.

  1. Open EMC (Exchange Management Console).
  2. Expand Server Configuration, then click on Hub Transport.
  3. Select the Hub Transport server that will accept relay connections.
  4. From the options on the left most pane, click "New Receive Connector".
  5. Give the connector a unique name, choose Custom for the intended use and click Next.
  6. Click Next on the Local Network settings page to accept the defaults.
  7. Highlight the entry and click the X to remove it.
  8. Click the down arrow next to Add. Add the IP address of the server that will relay through the Exchange server and click OK.
  9. Repeat step 8 to add all servers that will relay through the Exchange server. When finished, click Next.
  10. Click the New button to create the connector.

Now that the receive connector is created, it needs to be modified to allow relay.

  1. In the bottom middle pane, right-click the newly created receive connector and choose properties.
  2. Go to the "Permission Groups" tab. Clear all boxes except "Exchange servers".
  3. Go to the Authentication tab. Clear all boxes except "Transport Layer Security (TLS)" and "Externally Secured (for example, with IPsec)."
  4. Click OK to save the changes

Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identificación del artículo: SLN286539

Última fecha de modificación: 09/25/2014 11:43 AM

Califique este artículo

Fácil de comprender
¿Este artículo fue útil?
Envíenos sus comentarios
Los comentarios muestran caracteres no válidos, los caracteres especiales que no se aceptan son <> () &#92;
Disculpe, nuestro sistema de comentarios está actualmente inactivo. Vuelva a intentarlo más tarde.

Gracias. Sus comentarios se han enviado.