Knowledge Base

Interpreting LCD and Embedded Diagnostic (ePSA) event messages


The server LCD presents an error message, or an error message is generated when running the Enhanced Pre-Boot System Assessment (ePSA).



Refer to: Dell Event Message Reference

The Event Message Reference contains the error and event information generated by firmware and other agents that monitor system components. These events might be logged, presented to the user on one of the system management consoles, or both logged and displayed.

Additional Information:

To run the Embedded System Diagnostics (also known as Enhanced Pre-Boot System Assessment).
  1. As the system boots, press <F11>.
  2. Use the up and down arrows keys to select System Utilities -> Launch Dell Diagnostics


ID articolo: SLN288656

Data ultima modifica: 04/04/2017 05:33 PM


Valuta questo articolo

Preciso
Utile
Facile da comprendere
Questo articolo ti è stato d'aiuto?
No
Inviaci un feedback
I commenti non possono contenere i seguenti caratteri speciali: <>() \
Spiacenti, il sistema di feedback al momento non è attivo. Riprova più tardi.

Grazie per il tuo feedback.