文書番号: 000141927
Precision R5400 Rack Mounted Workstation : A Visual Guide
文書の内容
現象
Table of Contents:
NOTE: For a more detailed description about each location, please go to the system manuals at www.dell.com/manuals
This article provides a Visual Guide to your Precision R5400 Rack Mounted Workstation
1. Front View
The image below displays the Precision rack after the front bezel has been removed.
| 1 | Power Button, Power LED | 2 | Drive Activity Light |
| 3 | Network Activity light (2) | 4 | Diagnostic Lights (1234) |
| 5 | USB 2.0 Connectors (2) | 6 | Optical CD/DVD Drive |
| 7 | Optical Drive eject button | 8 | Hard drive bays (2) |
2. Rear View
| 1 | Power Connector | 2 | PCI Expansion Card Slots, Full-height (5) |
| 3 | Back Panel Connectors (See below) |
Back Panel Connectors
| 1 | Network Link Integrity Light | 2 | Network Adapter Connector (Primary) |
| 3 | Network Activity Light | 4 | Line-out Connector |
| 5 | Line-in/Microphone Connector | 6 | Serial Port connectors (2) |
| 7 | PS/2 Keyboard Connector | 8 | PS/2 Mouse connector |
| 9 | USB 2.0 Connectors (3) | 10 | Network Activity Light |
| 11 | Network Adapter Connector (Secondary) | 12 | Network Link Integrity Light |
3. Front Bezel Removal
1. Unlock the front bezel using the supplied key.
2. Press the tab at the left end of the bezel, then rotate the left end of the bezel away from the computer to release the right end of the bezel and pull the bezel away from the computer.
3. The removal is complete.
Back to Top
4. System Cover Removal
1. Establishing image.
2. To remove the computer cover, turn the latch release lock counterclockwise to the unlocked position.
3. Lift the latch on top of the computer. NOTE: The cover slides slightly toward the back of the computer when you lift the latch.
4. Grasp the cover on both sides and carefully lift the cover away from the chassis.
5. Complete.
Back to Top
文書のプロパティ
影響を受ける製品
Precision R5400
最後に公開された日付
21 2月 2021
バージョン
3
文書の種類
Solution