기술 문서

Setting a Static IP Address on your Dell Laser Printer using the Embedded Web Server (EWS)


Table of Contents:

  1. Setting a Static IP Address on your Dell Laser Printer using the Embedded Web Server (EWS)

This article provides information on "Setting a Static IP Address on your Dell Laser Printer using the Embedded Web Server (EWS)"


1. Setting a Static IP Address on your Dell Laser Printer using the Embedded Web Server (EWS)

The Embedded Web Server (EWS) is an online Web page which allows you to make changes to your Printer's Operating Panel via the network connection.

Please use the guide below to set a Static IP Address on your Dell Laser Printer (the guide below uses the Dell 5130cn Laser Printer as an example, other printers may vary slightly):

  1. Print a settings page from your printer to obtain the IP address assigned to it (this may change depending on your system type, please see your User Guide for information on Printing a Printer/System Settings Page).
  2. The IP Address will be listed under 'Network' sub-heading.


  3. Enter the Printers IP Address into a Web Browser and Enter.
  4. The EWS should now be open.


  5. Click on Print Server Settings.


  6. Click on the Print Server Settings Tab.


  7. Click on the TCP/IP Tab.


  8. In the TCP/IP Settings use the dropdown menu to select IP Address Mode as Manually Set.

  9. Input the Manual IP Address, the Manual Subnet Mask and the Manual Default Gateway.
    Note: In order to find your Subnet Mask and Default Gateway, use the IP Config Command as explained in the article below.

    Top commands for use in Command Prompt


  10. Scroll down and click on Apply New Settings.


  11. The Printer should restart and the settings should now be saved and the Printer should now have the IP Address you have set.
  12. Print another System Settings Page to ensure the setting has been saved correctly.

If these steps do not correct the problem, please contact Dell Technical Support.

Back to Top



문서 ID: SLN284175

최종 수정일: 12/16/2015 09:31 AM


이 문서 평가하기

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
지원 미지원
피드백을 보내 주십시오.
의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.
죄송합니다. 현재 피드백 시스템은 사용하실 수 없습니다. 잠시 후에 다시 시도하십시오.

피드백을 보내주셔서 감사합니다.