기술 문서

1394a PCIe 1.0 (Firewire) card causes reboot on shutdown or enter a reboot loop when installed in OptiPlex 3020



This article contains information regarding "1394a PCIe 1.0 (Firewire) card causes reboot on shutdown or enter a reboot loop when installed in OptiPlex 3020".


1394a PCIe 1.0 (Firewire) card causes reboot on shutdown

Some OptiPlex 3020 system users have reported issues on shutdown after installation of a 1x PCIe 1.0 1394a (Firewire) network card in the system. Systems included rebooting of the system when shutdown selected or the system entering a reboot loop requiring the system to be hard powered off by pressing and holding the POWER button till the power supply turns off. When the card is removed, the issue no longer occurred.

Flashing the BIOS to the most current version had no effect.


Change Wake on LAN (WOL) BIOS setting

A workaround was discovered for this issue.

Entering the Basic Input/Output System (BIOS) and changing the Wake on LAN (WOL) setting from the default Disabled to Enabled allowed the system to operate normally.


Click the button below to Tweet feedback or request assistance on anything in the above article.




문서 ID: SLN291769

최종 수정일: 09/15/2014 09:11 AM


이 문서 평가하기

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
지원 미지원
피드백을 보내 주십시오.
의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.
죄송합니다. 현재 피드백 시스템은 사용하실 수 없습니다. 잠시 후에 다시 시도하십시오.

피드백을 보내주셔서 감사합니다.