Knowledge Base

How To Enable The MP First Option On The B2360d / B2360dn Dell Laser Printers


Table of Contents:

  1. How to Enable the MP First Option on the B2360d / B2360dn Dell Laser Printers

This article provides information on "How to Enable the MP First Option on the B2360d / B2360dn Dell Laser Printers"


1. How to Enable the MP First Option on the B2360d / B2360dn Dell Laser Printers

The MP First option will allow the printer to pull paper from the Multi-Purpose Feeder anytime paper is inserted. To set this up, please perform the following steps from the printers control panel.

  1. Press the Setup button
  2. Press OK on Paper Menu
  3. Press the Right Arrow button until Configure MP is displayed, then press OK
  4. Press the Right Arrow button until First is displayed, then press OK

More information can be found in the B2360n / B2360dn User's Guide.

If these steps do not correct the problem, please contact Dell Technical Support.


Back to Top




Article ID: SLN153581

Last Date Modified: 09/18/2015 11:33 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Feedback shows invalid character, not accepted special characters are <> () &#92;
Sorry, our feedback system is currently down. Please try again later.

Thank you. Your feedback has been sent.