Knowledge Base

OptiPlex 990 Removal Guide Index for Customer Replaceable Parts (CRU)



This article provides information on how to safely remove the customer replaceable units (CRUs) in the various Dell OptiPlex 990 Chassis


Table of Contents:

  1. Removal Guides
  2. The Mini Tower (MT) Chassis
  3. The Desktop (DT) Chassis
  4. The Small Form Factor (SFF) Chassis
  5. The Ultra Small Form Factor (USFF) Chassis

Removal Guide

These guides will take you step by step through the safe removal of what are considered to be the Customer Replaceable Unit (CRU) parts of the Various OptiPlex 990 Chassis. (CRUs are the parts of the system that shouldn't need an engineer to remove or replace.)

The guides will also include pictures to reference what's involved.

If these guides do not cover what you are looking to do, then you will want to reference your System Manual.

Back to Top


The Mini Tower (MT) Chassis

Back to Top


The Desktop (DT) Chassis

Back to Top


The Small Form Factor (SFF) Chassis

Back to Top


The Ultra Small Form Factor (USFF) Chassis

Back to Top





Article ID: SLN293075

Last Date Modified: 02/09/2017 09:33 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.