Consulta de temas

Enabling Do Not Allow Client Printer Redirection on a Hyper-V host



Article Summary: This article is designed to address the best practices for enabling Do not allow client printer redirection on a Windows server that is a member of a Hyper-V cluster using iSCSI



Solution:

Follow the steps in the solution to achieve this goal.

1. Press Windows Logo+R, type gpedit.msc and press Enter.




2. Click the arrow next to Computer Configuration under Local Computer Policy to expand it.




3. Click the arrow next to Administative Templates to expand it.

4. Click All Settings to show all group policy settings.




5. Scroll down to Do not allow client printer redirection and double-click on it to edit the setting.




6. Click the Enabled button to enable the policy and click OK to save the setting.



Additional Information:

Additional information about best practices for Hyper-V failover clustering can be found on TechNet.




Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identificación del artículo: SLN290594

Última fecha de modificación: 08/27/2014 12:31 PM


Califique este artículo

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
No
Envíenos sus comentarios
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"
Disculpe, nuestro sistema de comentarios está actualmente inactivo. Vuelva a intentarlo más tarde.

Muchas gracias por sus comentarios.