Baza wiedzy

Dell OpenManage Deployment Toolkit May Not Show BMC Version on a System Without iDRAC Enterprise

Article Summary: This article provides information on DTK may not show BMC version on a system without iDRAC Enterprise.


On PowerEdge™ servers having only iDRAC Express™ and not iDRAC Enterprise™, Dell OpenManage Deployment Toolkit™ (DTK) may not show the Baseboard Management Controller (BMC) version.

Running "SYSCFG bmcversion" does not return the BMC version.

On systems with the iDRAC installed, the BMC version is displayed properly.


Instead of "SYSCFG bmcversion", running "SYSCFG idracversion" shows the correct BMC version.

A permanent is available in DTK version 3.2 and greater. (Click here for download).


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identyfikator artykułu: SLN285985

Data ostatniej modyfikacji: 10/21/2013 12:00 AM

Oceń ten artykuł

Łatwe do zrozumienia
Czy ten artykuł był przydatny?
Tak Nie
Wyślij nam swoją opinię
Komentarze nie mogą zawierać znaków specjalnych: <>()\
Niestety, nasz system przekazywania opinii jest obecnie niedostępny. Spróbuj ponownie później.

Dziękujemy za uwagi.