Baza wiedzy

OptiPlex 360 Removal Guide Index For Customer Replaceable Parts (CRU)

Article Summary: This article provides information on how to safely remove the customer replaceable units (CRUs)on the Dell OptiPlex 360

Table of Contents:
  1. Removal Guides
  2. The Mini Tower (MT) Chassis
  3. The Desktop (DT) Chassis


Removal Guide

These guides will take you step by step through the safe removal of what are considered to be the Customer Replaceable Unit (CRU) parts of the Various OptiPlex 360 systems. (CRUs are the parts of the system that shouldn't need an engineer to remove or replace.)

The guides will also include pictures to reference what's involved.

If these guides do not cover what you are looking to do, then you will want to reference your System Manual.

Back to Top


The Mini Tower (MT) Chassis

Back to Top


The Desktop (DT) Chassis

Back to Top

If you require further assistance or wish to give us feedback, please engage our technical team on Twitter.


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identyfikator artykułu: SLN289069

Data ostatniej modyfikacji: 03/19/2014 12:00 AM

Oceń ten artykuł

Łatwe do zrozumienia
Czy ten artykuł był przydatny?
Tak Nie
Wyślij nam swoją opinię
Komentarze nie mogą zawierać znaków specjalnych: <>()\
Niestety, nasz system przekazywania opinii jest obecnie niedostępny. Spróbuj ponownie później.

Dziękujemy za uwagi.