База знаний

How To Configure A Shared Folder For Scanning On Mac OSX Operating System




Table of Contents:

  1. Create A Shared Folder
  2. Obtain The IP Address Of The System
  3. Setup Scanning On Dell Laser Printers
  4. Previous Step (Selecting An Operating System For Scanning Setup)

This article explains how to configure a shared folder for scanning to on Mac OSX Operating System


1. Create A Shared Folder

  1. Create a new folder on the computer
  2. Click on the Apple icon in the top left corner and select System Preferences
  3. Click on Sharing and then check the File Sharing box to enable file sharing
  4. Next, add the created folder by clicking the Plus(+) symbol below the list of shared folders
  5. Select the created folder and then click Add
  6. On the right hand column, configure the share access for the scan folder. Select Everyone, and then select Read & Write
  7. After configuring the share rights, click on Options
  8. Check the Share Files and Folders Using SMB box, and make sure the user account check box is checked
  9. Click Done

2. Obtain The IP Address Of The System

Please save the IP address of the system somewhere for reference as it will be used in the printer setup
  1. Go to System Preferences
  2. Select Network
  3. Write down the IP Address listed on the network screen


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Код статьи: SLN289015

Дата последнего изменения: 02/02/2017 06:39 AM


Оцените эту статью

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
Да Нет
Отправьте нам свое мнение
Комментарии не должны содержать следующие специальные символы: <>()\
К сожалению, наша система обратной связи в настоящее время не работает. Повторите попытку позже.

Благодарим вас за отзыв.