База знаний

OptiPlex 7020 Small Form Factor (SFF) Removal Guide for the Optical Drive, Intrusion Switch, Hard Drive, Memory and Coin Cell Battery



This article provides information on removing components from a OptiPlex 7020 Small Form Factor


Table of Contents:

  1. Optical Drive
  2. Intrusion Switch
  3. Hard Drive / Drive Cage
  4. Memory
  5. Coin-Cell Battery

1. Optical Drive

1. Pre-Removal Instructions Before removing the Optical Drive:

  • During installation or removal of any hardware always ensure all data is backed up properly

  • Disconnect any telephone, network, or USB cables from the computer

  • Disconnect the computer and all attached devices from their electrical outlets

  • Remove the System Cover.

2. Establishing image.



3. Disconnect the (1)data cable and (2)power cable off the optical drive.



4. Pull and hold the release tab while sliding the optical drive off its bay.



5. Flex the bracket to remove the optical drive.



6. Complete.






Back to Top


2. Intrusion Switch

1. Pre-Removal Instructions Before removing the Intrusion Switch:

  • During installation or removal of any hardware always ensure all data is backed up properly

  • Disconnect any telephone, network, or USB cables from the computer

  • Disconnect the computer and all attached devices from their electrical outlets

  • Remove the System Cover
The intrusion switch is an optional component.

2. Establishing image.



3. Disconnect the intrusion cable from system board.



4. Slide the intrusion switch inward and remove it from the chassis.



5. Complete.

Back to Top


3. Hard Drive / Drive Cage

1. Pre-Removal Instructions Before removing the Hard Drive / Drive Cage:

  • During installation or removal of any hardware always ensure all data is backed up properly

  • Disconnect any telephone, network, or USB cables from the computer

  • Disconnect the computer and all attached devices from their electrical outlets

  • Remove the System Cover and Optical Drive

2. Establishing image.



3. Disconnect the (1)data cable and (2)power cable off the hard drive.



4. Slide the drive cage lock towards the rear chassis direction into the unlock position.



5. Lift up the drive cage with the hard drive off the system.

If removing the drive cage is for the purpose of easy access to other components in the system, do not remove the hard drive.

6. Press the two bracket tabs inward while sliding the entire hard drive assembly off the system.



7. Flex the sides of the hard drive bracket in the opposite direction, then remove the hard drive.



8. Complete.




Back to Top


4. Memory

1. Pre-Removal Instructions Before removing the Memory:

  • During installation or removal of any hardware always ensure all data is backed up properly

  • Disconnect any telephone, network, or USB cables from the computer

  • Disconnect the computer and all attached devices from their electrical outlets

  • Remove the System Cover, Optical Drive and Drive Cage

2. Establishing image.



3. Gently spread the securing clips away from the memory.



4. Remove the memory off the system.

Repeat step 3 and 4 if there are more than one memory installed.

5. Complete.




Back to Top


5. Coin-Cell Battery

1. Pre-Removal Instructions Before removing the Coin-Cell Battery:

  • During installation or removal of any hardware always ensure all data is backed up properly

  • Disconnect any telephone, network, or USB cables from the computer

  • Disconnect the computer and all attached devices from their electrical outlets

  • Remove the System Cover, Optical Drive and Drive Cage

2. Establishing image.



3. Push the retention clip away until the coin-cell battery pops up.



4. Remove the coin-cell battery



5. Complete.


Back to Top





Код статьи: SLN295401

Дата последнего изменения: 10/11/2017 08:20 AM


Оцените эту статью

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
Да Нет
Отправьте нам свое мнение
Комментарии не должны содержать следующие специальные символы: <>()\
К сожалению, наша система обратной связи в настоящее время не работает. Повторите попытку позже.

Благодарим вас за отзыв.