This article provides information on removing components from a OptiPlex 9020 Micro Form Factor System.
1. Pre-Removal Instructions Before removing the WLAN Card:
2. Establishing image.
3. Remove the Screw securing the WLAN card to the WLAN Holder.
4. Remove the WLAN Holder.
5. Remove the two (2) antenna connectors.
6. Lift the Card Up and out to remove it from the system.
7. Complete.
Back to Top
1. Pre-Removal Instructions Before removing a Memory DIMM:
2. Establishing image.
3. Press in on the two (2) blue tabs on the Fan Shroud, in order to lift it out of the way and gain access to the Memory DIMMs.
4. Pull the two (2) securing clips away from either side of the Memory DIMM.
5. The memory lifts up and pull it out of the system.
6. Complete.
Return to the 9020 OptiPlex Teardown/Removal Guide
Back to Top
If you require further assistance or wish to give us feedback, please engage our technical team on Twitter.
Код статьи: SLN294870
Дата последнего изменения: 11/24/2014 06:17 AM
Благодарим вас за отзыв.