Kunskapsbank

PERC - Dell PowerEdge™ 12G Servers With Numerous PERC H710 or H810 RAID Controllers May Take 30 Minutes to Boot Into UEFI


This article provides information on Dell PowerEdge 12G Servers With Numerous PERC H710 or H810 RAID Controllers May Take 30 Minutes to Boot Into UEFI.

Issue


PowerEdge 12G servers may take 30 minutes to boot into the UEFI interface.


Answer


PowerEdge 12G servers that have numerous PERC H710 and H810 controllers with very large quantities of hard disk drives attached may take an extended period of time to boot into the LifeCycle controller. In rare cases, it may take up to 30 minutes. There is no work around except to wait the approximate 30 minutes, at which time the system should enter the Life Cycle controller.



Need more help?
Find additional PowerEdge and PowerVault articles

Visit and ask for support in our Communities

Create an online support Request




Artikel-ID: SLN266200

Senast ändrad: 08/29/2016 10:05 AM


Betygsätt den här artikeln

Korrekt
Användbart
Lätt att förstå
Var den här artikeln till nytta?
Ja Nej
Skicka dina synpunkter
Kommentarer får inte innehålla följande specialtecken: <>()\
Vårt feedbacksystem är tyvärr ut funktion just nu. Försök igen senare.

Tack för dina synpunkter.