Databáza poznatkov

How to Configure a Private VLAN (PVLAN) and Port Group on your vSphere Distributed Switch (vDS) in VMware vSphere ESXi 5.x

Article Summary: This article provides information on how to configure a Private VLAN (PVLAN) and port group on your vSphere Distributed Switch (vDS) in vSphere 5.x.

How to Configure a Private VLAN (PVLAN) and Port Group on your vSphere Distributed Switch (vDS) in VMware vSphere ESXi 5.x :

Types of PVLANS :

Promiscuous : Primary PVLAN - Default PVLAN and can communicate with any port in the VLAN.
Isolated : Secondary PVLAN - Only able to communicate with the promiscuous port.
Community : Secondary PVLAN - Able to communicate with other ports on the VLAN and the promiscuous port.

  1. Set the physical switch port to trunk and any PVLANs added on your vDS need to be added to the trunk on the physical switch port.
  2. In the vSphere Client, go to the home screen and click on Networking
  3. Right click on the distributed switch you want to configure a PVLAN and then click on Edit Settings
  4. Click on the Private VLAN tab
  5. Under Primary private VLAN ID, click on [Enter a private VLAN ID here] to input your primary PVLAN ID. NOTE: This will be your promiscuous PVLAN by default
  6. To add secondary PVLANS, click on [Enter a private VLAN ID here] under Secondary private VLAN ID and input a PVLAN ID
  7. From the Type dropdown, choose whether you want an Isolated or Community PVLAN
  8. Click on the OK button
  9. Right click on your distributed switch and click on New Port Group
  10. Input your name for your port group
  11. From the VLAN type dropdown, choose Private VLAN
  12. Choose the Primary VLAN you want to use for this port group and then click on the Next button
  13. Review all of the settings and click on the Finish button

Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identifikátor článku: SLN285530

Dátum poslednej zmeny: 10/07/2014 11:29 AM

Ohodnotiť tento článok

Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
Áno Nie
Pošlite nám pripomienky.
Pripomienky obsahujú neplatný znak. Nie je možné používať špeciálne znaky <> () &#92;.
Ľutujeme, náš systém odosielania pripomienok je momentálne nefunkčný. Skúste znova neskôr.

Ďakujeme. Vaše pripomienky boli odoslané.