Databáza poznatkov

PowerEdge M1000e CMC Does Not Log an Event When an EQL PS-M4110 Shuts Down Due to an Over Power/Current Condition


Article Summary: This article provides information on the CMC does not log an event when an EQL PS-M4110 shuts down due to an over power/current condition.



Question

The Dell EqualLogic™ PS-M4110 Blade Array unexpectedly shuts down with no indication of the cause in the Dell PowerEdge M1000e™ Blade Chassis Management Contrller (CMC) log.


Answer

The PS-M4110 is designed to shut down if it experiences an over power/current or an over temperature condition. If the cause of the shutdown is due to an over temperature condition, an over temperature event is logged by the CMC, but if the cause is an over power/current condition, the event is not logged by the CMC.

Currently, this is considered working as designed, and a shutdown due to an over power/current condition is unlikely. Engineering is aware of the issue, and an enhancement is being investigated. If a PS-M4110 unexpectedly shuts down with no indication of the cause in the CMC log, an over power/current condition could be suspect and should be investigated accordingly.


 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identifikátor článku: SLN286611

Dátum poslednej zmeny: 11/18/2013 12:00 AM


Ohodnotiť tento článok

Presné
Užitočné
Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
Áno Nie
Pošlite nám pripomienky.
Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\
Ľutujeme, náš systém odosielania pripomienok je momentálne nefunkčný. Skúste znova neskôr.

Ďakujeme vám za pripomienky.