Article Summary: This article addresses unsupported Cisco SPF+ modules when used with Broadcom network interface cards.
The unsupported use of a Cisco SFP+ Module SFP-H10GB-CU3M on an Broadcom 57810 NetXtreme II 10 Gigabit NIC can cause network performance issues. Intermittent iSCSI disconnections may occur.
Replace the SFP+ module with a supported module.
Event ID 34 will be posted in the System event log.
Log Name: System
Date: 11/28/2013 10:51:15 AM
Event ID: 34
Task Category: None
The description for Event ID 34 from source ebdrv cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ID de l'article : SLN290704
Date de la dernière modification : 08/27/2014 03:51 PM