Knowledge Base

Enabling Do Not Allow Client Printer Redirection on a Hyper-V host



Article Summary: This article is designed to address the best practices for enabling Do not allow client printer redirection on a Windows server that is a member of a Hyper-V cluster using iSCSI



Solution:

Follow the steps in the solution to achieve this goal.

1. Press Windows Logo+R, type gpedit.msc and press Enter.




2. Click the arrow next to Computer Configuration under Local Computer Policy to expand it.




3. Click the arrow next to Administative Templates to expand it.

4. Click All Settings to show all group policy settings.




5. Scroll down to Do not allow client printer redirection and double-click on it to edit the setting.




6. Click the Enabled button to enable the policy and click OK to save the setting.



Additional Information:

Additional information about best practices for Hyper-V failover clustering can be found on TechNet.




Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Article ID: SLN290594

Last Date Modified: 08/27/2014 12:31 PM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.