Base de connaissances

OptiPlex 9020 Micro Form Factor (MFF) Removal Guide for the WLAN Module and Memory


Table of Contents:

  1. WLAN Removal
  2. Memory Removal

This article provides information on removing components from a OptiPlex 9020 Micro Form Factor System.


1. WLAN Removal

1. Pre-Removal Instructions Before removing the WLAN Card:

  • During installation or removal of any hardware always ensure all data is backed up properly
  • Disconnect any telephone, network, or USB cables from the computer
  • Disconnect the computer and all attached devices from their electrical outlets
  • Remove the Top Cover and the Hard Drive

2. Establishing image.

1

3. Remove the Screw securing the WLAN card to the WLAN Holder.

2

4. Remove the WLAN Holder.

3

5. Remove the two (2) antenna connectors.

4

6. Lift the Card Up and out to remove it from the system.

5

7. Complete.

6


Back to Top


2. Memory Removal

1. Pre-Removal Instructions Before removing a Memory DIMM:

  • During installation or removal of any hardware always ensure all data is backed up properly
  • Disconnect any telephone, network, or USB cables from the computer
  • Disconnect the computer and all attached devices from their electrical outlets
  • Remove the Top Cover

2. Establishing image.

1

3. Press in on the two (2) blue tabs on the Fan Shroud, in order to lift it out of the way and gain access to the Memory DIMMs.

2

4. Pull the two (2) securing clips away from either side of the Memory DIMM.

3

5. The memory lifts up and pull it out of the system.

4


Note: Repeat steps 4 and 5 for any additional memory in the system.

6. Complete.

6


Return to the 9020 OptiPlex Teardown/Removal Guide


Back to Top


If you require further assistance or wish to give us feedback, please engage our technical team on Twitter.




Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID de l'article : SLN294870

Date de la dernière modification : 11/24/2014 06:17 AM


Noter cet article

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
Oui Non
Envoyez-nous vos commentaires
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\
Désolé, notre système de collecte des commentaires est actuellement indisponible. Veuillez réessayer ultérieurement.

Merci pour vos commentaires.