知識庫

iDRAC7 - Keytab File Exists is Failed in Active Directory Test Setting



Article Summary: This article provides information on iDRAC7: Keytab file exists is Failed in Active Directory Test Setting.


Question

If the iDRAC7 is configured for Active Directory authentication the Keytab file exists is Failed in Active Directory Test Setting.

Answer

The issue occurs after iDRAC FW update and with a custom SSL certificate installed in iDRAC.

After update, credential vault where Keytab file is stored cannot be mounted.

The issue exists on iDRAC Firmware 1.30.30.

It happens only if there is a custom SSL certificate installed in iDRAC. By default iDRAC has a default certificate which is re-created on every firmware update, but if a custom SSL certificate is installed, this custom certificate is not touched. The problem is in the build process, every build is signed with a different key. That causes the credential vault to be encrypted with one key and not able to be decrypted when the firmware is upgraded because the key was changed.

This was fixed in iDRAC7 Firmware release 1.40.40.

Ensure that the iDRAC7 Firmware is at version 1.49.40 or higher.

For more information see the iDRAC7 Release Summary




 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

文章 ID: SLN266074

上次修改日期: 09/18/2013 12:00 AM


為本文評分

準確
實用
易懂
這篇文章對您有用嗎?
傳送意見反應
意見反應中有無效的字元,不接受的特殊字元如下 <> () &#92;
很抱歉,我們的意見回饋系統目前關閉中。請稍後再試。

感謝您。您的意見已送出。