This article provides information on removing components from a Latitude E6440
1. Pre-Removal Instructions Before removing the Bottom door cover:
2. Establishing image.
3. Remove the three screws securing the bottom door in place.
4. Lift the top edge of the bottom door upward and remove the bottom door.
5. Complete.
Back to Top
1. Pre-Removal Instructions Before removing the LCD Hinge Cap:
2. Establishing image.
3. Remove the four screws securing the LCD hinge cap in place.
4. Flip the LCD hinge cap and remove from the system.
5. Complete.
Back to Top
1. Pre-Removal Instructions Before removing the Corner Caps:
2. Establishing image.
3. Remove the two screws securing the left corner cap in place.
4. Remove the left corner cap.
5. Remove the single screw securing the right corner cap in place.
6. Remove the right corner cap.
7. Complete.
Back to Top
Return to the Latitude E6440 Teardown/Removal Index.
Click the button below to Tweet feedback or request assistance on anything in the above article.
Article ID: SLN289018
Last Date Modified: 12/01/2014 06:33 AM
Thank you for your feedback.