Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

How to Resolve Tray 1 Empty / Load Tray 1 Errors on the B2360d / B2360dn Dell Laser Printer

Summary: Resolve Tray 1 empty or Load Tray 1 errors on B2360d / B2360dn Dell Laser Printer.

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content


Symptoms


This article provides information and steps on how to resolve Tray 1 Empty / Load Tray 1 Errors on your B2360d / B2360dn Dell Laser Printer.


 
  1. Check that there is no damage to the paper and that the guides are adjusted to fit the paper. If a new ream of paper is available try swapping out the paper.
  2. Check the he paper size in the tray matches the paper size set in the Print Driver.
  3. Check that the newest firmware is being used. If not install the latest firmware for this model.
    SLN291554_en_US__1icon Caution: Power off the printer and unplug the printer from the wall outlet before completing the following steps.
  4. Remove the paper tray.
    SLN291554_en_US__24 remove paper tray
  5. Locate pick arm in the center, just above where paper tray was.
    SLN291554_en_US__35 locate pick arm
  6. Roll the pick tire off of the pick arm (this has a rubber band feel).
    SLN291554_en_US__46 roll off tires
  7. Clean the rollers with an Alcohol based cleaner (Isopropyl alcohol preferred).
    SLN291554_en_US__57 clean rollers
  8. Reinstall Feed tires (2) onto pick arm then reinstall the paper tray.
  9. Plug the printer back in and turn the power on. Print a test page.

If these steps do not correct the problem, please contact Dell Technical Support.


Back to Top
 

Article Properties


Affected Product

Dell B2360d Mono Laser Printer, Dell B2360dn Mono Laser Printer

Last Published Date

04 Dec 2020

Version

2

Article Type

Solution