|

Dell W-Series instant access points

Open

WiFi without an external controller

Cost-effective, enterprise-class WiFi networking for a variety of environments. Easy to deploy, use and maintain.

Call for Pricing
 

 

ModelsW-IAP224 and
W-IAP225
W-IAP274 and
W-IAP275
W-IAP 155 and
W-IAP 155P
W-IAP134 and
W-IAP135
W-IAP114 and
W-IAP115
W-IAP108 and
W-IAP109
(Remote IAPs)
Data rate1.3 Gbps
3x3 MIMO
802.11ac
1.3 Gbps
3x3 MIMO
802.11ac
900 Mbps
3x3 MIMO
900Mbps (450Mbps each radio)450 Mbps
3x3 MIMO
300Mbps
RadiosDual radio, 5GHz 802.11ac and 2.4GHz 802.11n
indoor
Dual radio,
5GHz 802.11ac and 2.4GHz 802.11n
outdoor
Dual radio, dual-band 802.11n indoorDual radios: Simultaneous operation in 2.4 and 5GHz band. (Concurrent operation of both radios in the same band is not supported.)Dual radio, 5-GHz and 2.4-GHz 802.11n 3x3:3Dual-radio, dual-band 802.11n indoor
Operating frequencies2.4000 GHz to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.850 GHz
2.4000 GHz to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.875 GHz
2.400 to 2.4835GHz
5.150 to 5.250GHz
5.250 to 5.350GHz
5.470 to 5.725GHz
5.725 to 5.850GHz
2.4 to 2.5GHz, 5.150 to 5.950GHz with DFS support.2.4000 GHz to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.850 GHz
(Country-specific restrictions apply):
2.4 to 2.4835 GHz, 5.150 to 5.875 GHz
AntennasIAP-224: Three RP-SMA connectors for external dual-band antennas
IAP-225: Six integrated down-tilt omni-directional antennas for 3x3 MIMO with maximum antenna gain of 3.5 dBi in 2.4 GHz and 4.5 dBi in 5 GHz.
Built-in antennas are optimized for horizontal ceiling mounted orientation of IAP-225
IAP-274: Six N-type female connectors for external antennas
IAP-275: Six integrated omni-directional antennas for 3x3 MIMO with maximum antenna gain of 5 dBi in 2.4 GHz and 5 dBi in 5 GHz. Built-in antennas are optimized for horizontal mounted orientation of IAP-275.
2.4GHz: Two internal omni-directional antennas for 2x2 MIMO with maximum antenna gain of 5.5dBi
5GHz: Three internal omni-directional antennas for 3x3 MIMO with maximum antenna gain of 5.0dBi
Antennas are optimized for vertical orientation of the device
W-AP134: three RP-SMA for external
dual-band antennas
W-AP135: six internal
omni-directional, dual-band
10/100/1000
BASE-T Ethernet network interface (RJ-45)
Auto-sensing link speed and MDI/MDX
802.3az Energy Efficient Ethernet (EEE)
PoE-PD: 48 Vdc 802.3af PoE or 802.3at PoE+
RAP-108: Two RP-SMA connectors
for external dual-band antennas
RAP-109: Four integrated omni- directional antennas for 2x2 MIMO with maximum antenna gain of 5.0 dBi in both 2.4 and 5 GHz. Built-in antennas are optimized for vertical orientation
Network interfacesTwo 10/100/1000
BASE-T Ethernet network interfaces (RJ-45)
Auto-sensing link speed and MDI/MDX
Load balancing statement TBD
MACSec encryption and 802.3az EEE
One PoE+ PD port 10/100/1000
BASE-T Ethernet network
interface (RJ-45)
One port 10/100/1000
BASE-T Ethernet network interface (RJ-45)
ENET0 (uplink): One 10/100/1000
BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX
ENET1-4 (local): Four 10/100/1000
BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX
ENET1 & ENET2 capable of sourcing POE power
Two 100/1000
Base-T Ethernet Auto- sensing MDI/MDX. Supports MACSec Encryption, 802.3az
DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length
USB 2.0 host interface (Type A connector)
Serial console interface (RJ-45, TTL levels)
ENET0 (uplink): One
10/100/1000
Base-T Ethernet (RJ-45),
auto-sensing link speed and MDI/
MDX
ENET1 (local): One 10/100
Base-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX
Other interfacesDC power interface, accepts 1.7/4.0mm
center-positive circular
plug with 9.5mm length
USB 2.0 port
(Type A connector)
Serial console interface (RJ45, TTL levels)
Serial console interface (micro USB)DC power interface:
12V dc +/- 5%
Console interface (RJ45)Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at-compliant sourceOne USB 2.0 port (Type A connector
One serial console interface (RJ-45)
Power over Ethernet (PoE) interfacesPOE-PD: 48 Vdc 802.3af POE or 802.3at POE+Power over Ethernet (PoE): 48 Vdc (nominal) 802.3at-compliant source 802.3af or 802.3at power sourcing support (PSE) provided on two local Ethernet ports (ENET1, 2)
Device capable of supplying 1x full 802.3at power or 2x full 802.3af power
48V DC 802.3af or 802.3at or PoE+ interoperable with intellisource PSE sourcing intelligence (both ports)Power sources sold separately
Direct DC source: 12 Vdc nominal, +/- 5%
802.3af (PoE) or 802.3at (PoE+) on uplink Ethernet port Note: When using PoE, the USB port will be enabled only when an
802.3at-compliant source is used
Power interfacesDirect DC source: 12 Vdc nominal,
+/- 5%
Power over Ethernet (POE):
48 Vdc (nominal) 802.3af or 802.3at
compliant source
AC power interface; power cords sold separatelyW-IAP155: 12Vdc from external AC-to-DC power adapter
W-IAP155P: 54Vdc from external AC-to-DC power adapter
12V DC, 1.25AMaximum power consumption: 13 watts, plus up to 2.5 watts for attached USB device.One port for DC power connector
(DC Input from AC power adapter or
POE only)
Power consumption15W, plus up to 2.5W for attached
USB device.
23 wattsWithout USB device connected: 17.5 W
With USB device: 20 W
When sourcing POE power (W-IAP155P only),total power consumption may increase by up to 34W
15 Watts (maximum)IndoorWithout USB device connected: 12.5
watt
With USB device: 15 watts
Environmental ClassIndoorOutdoor; Operating Altitude: 3000m; Chassis Rating: IP66 and IP67; Wind Survivability: Up to 165 mph; Shock and Vibration: ETSI 300-19-2-4 spec T41.E 4M3IndoorIndoor, plenum-ratedOperating:
­ Temperature: 0° C to +50° C (+32° F to +122° F)
­ Humidity: 5% to 95% non-condensing
Indoor
Operating temperatureTemperature:
0° C to +50° C (+32° F to +122° F)
Humidity: 5% to 95% non-condensing
Temperature: -40° C to +65° C (-40° F to +150° F); Humidity: 5% to 95% non-condensingTemperature: 0° C to +40° C (+32° F to +104° F)
Humidity: 5% to 95% non-condensing
0°C to 50°C (32°F to 122°F)0°C to 50°C (32°F to 122°F)Temperature: 0° C to 40°C (32°F to
104°F)
Humidity: 5% to 95% non-condensing

Models

W-IAP175AC and W-IAP175P

W-IAP104 and W-IAP105


W-IAP103

W-IAP92 and W-IAP93

W-IAP3WN and
W-IAP3WNP

Data rate

600Mbps (300Mbps each radio)

600Mbps (300Mbps each radio)

300 Mbps
2x2 MIMO
802.11n

300Mbps

300Mbps

Radios

Dual radios: 2.4 and 5GHz band

Dual radios: 2.4 and 5GHz band

Dual radio, 5-GHz and 2.4-GHz 802.11n 2x2:2

Dual radios: 2.4 and 5GHz band

Single radio:
2.4 or 5GHz band

Operating frequencies

N/A

N/A

2.4000 GHz to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.850 GHz

2.4-2.5 GHz

2.4-2.5 GHz

Antennas

Four N-type interfaces (two per band) for external 2.4 and 5GHz antennas

W-AP104: four RP-SMA for
external 2.4 and 5GHz antennas
W-AP105: four internal
omni-directional, dual-band

Four integrated down-tilt omni-directional antennas for 2x2
MIMO with maximum antenna gain of 3.9 dBi at 2.44 GHz,
4.1 dBi at 5.2 GHz and 4.3 dBi at 5.8 GHz. Built-in antennas are
optimized for horizontal ceiling mounted orientation of the IAP.

W-AP92: two RP-SMA for
W-AP93 two internal
omni-directional, dual-band

Both
models
have two internal
omni-directional, dual-band antennas.

Network interfaces

One 100/1000Base-T Ethernet, auto- sensing MDI/MDX

One 100/1000Base-T Ethernet, auto- sensing MDI/MDX

10/100/1000BASE-T Ethernet network interface (RJ-45); Auto-sensing link speed and MDI/MDX; 802.3az Energy Efficient Ethernet (EEE); PoE-PD: 48 Vdc (nominal) 802.3af PoE or 802.3at PoE+

One 100/1000Base-T Ethernet, auto- sensing MDI/MDX

Three RJ45 ports 10/100Base-T Ethernet,
Auto-sensing MDI/MDX and one USB port for connecting a cellular modem

Other interfaces

Console interface (USB)

Console interface (RJ45)

DC power interface, accepts 1.7/4.0-mm center-positive
circular plug with 9.5-mm length; Serial console interface (proprietary; optional adapter cable available)

Console interface (RJ45)

Console interface (custom)

Power over Ethernet (PoE) interfaces

W-AP175P:
802.3at-compatible PoE input (PD)
W-AP175AC and W-AP175DC: 802.3af
compatible PoE output (PSE)

W-AP175P:
802.3at-compatible PoE input (PD)
W-AP175AC and W-AP175DC: 802.3af
compatible PoE output (PSE)

Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at-compliant source

48V DC 802.3af-compatible

W-IAP3WN: 802.3af PoE (15.4W)
on the E2 port

Power interfaces

12–48V DC or 100–240V AC

48V DC 802.3af-compatible

Direct DC source: 12 Vdc nominal, +/- 5%

12V DC, 1.25A

W-IAP3WN: 12V DC, 1.25A
W-IAP3WNP: 48V DC, 0.75A
W-IAP3WN: 100–240V, 0.5A
W-IAP3WNP: 100–240V, 0.75A

Power consumption

18 Watts (maximum)

12V DC, 1.25A
12.5 Watts (maximum)

Max 9.5W (POE) or 8W (DC)

10 Watts (maximum)

W-IAP3WN: 4 watts/6.5 watts
W-IAP3WNP: 5.5, 8, or 26 watts

Environmental Class

Outdoor

Indoor, plenum-rated

Indoor

Indoor, plenum-rated

Indoor

Operating temperature

W-IAP175P: –30°C to +60°C (–22°F
to +140°F)
W-IAP175AC and W-IAP175DC:
–40°C to +55°C (–40°F to 131°F)

0°C to 50°C (32°F to 122°F)

0° C to +40° C (+32° F to +104° F)

0°C to 50°C (32°F to 122°F)

0°C to +40°C (32°F to 104°F)


Regulatory Information:
Product Safety, EMC and Environmental Data Sheets
Dell Regulatory Compliance Home Page
Dell and the Environment 
Deploy with ease
Deploy with ease
Be up and running in minutes, provisioning your W-Series Instant Access Points (IAPs) in a few easy steps using virtually any laptop’s wireless connection. W-Series IAPs are designed to provide enterprise-class networking services without enterprise-size complexity and include an expanded wired + wireless IAP portfolio with high-end wireless features for hotspots and remote branches.

Protect your investment
As WLAN requirements grow, configuration settings can be used to easily convert the W-Series IAPs to campus APs that work with a centralized-controller architecture.
Enterprise-grade WiFi network
Combine enterprise capabilities with entry-level simplicity using WiFi network through W-Series IAPs with built-in virtual controllers. When multiple IAPs are connected, a single IAP acts as a primary virtual controller. If that controller fails, another W-Series IAP in the chain automatically takes over as the primary virtual controller without disrupting services. To expand your network, just add more W-Series IAPs. Configuration is automatically uploaded from the primary virtual controller.

The virtual controller technology is able to monitor and control critical network maintenance tasks, including:
  • Specialized Adaptive Radio Management functions that optimize WiFi client behavior, enabling IAPs to avoid RF interference
  • Auto-configuration for added IAPs
  • 802.1x authentication
  • Role- and device-based policy enforcement
  • Rogue detection
Wired + wireless instant or remote AP
Several W-Series IAP models provide both wired and wireless connectivity, ideal for small branches or teleworkers. The wired connectivity includes additional Ethernet ports to connect wired devices as well as a USB port to connect a 3G/4G modem for internet connectivity.
Confidently manage your WiFi networks
Confidently manage your WiFi networks
Securely manage and administer a W-Series IAP WiFi network from a single built-in web-based GUI.

Manage multiple W-Series IAP WiFi networks using Dell W-Series AirWave Software Management Suite (AWMS). AirWave manages local or geographically dispersed deployments and aggregates them into one console. It gives you a single, accurate picture of everything that affects service quality for your users — from the wired infrastructure to the RF environment to individual mobile devices.
Enhance RF management
Build wireless networks that adjust to how WiFi clients interact. W-Series IAPs with Dell Adaptive Radio Management (ARM) technology help ensure that data, voice and video applications have sufficient network resources to operate properly, allowing maximum client performance while enhancing stability and predictability of the entire WiFi network. ARM features include:
  • Spectrum load balancing that uniformly distributes clients across channels in high-density environments
  • Noise awareness that dynamically shifts clients away from channels hampered by outside interference
  • Band steering that enables IAPs with both radios available to dynamically transfer clients away from crowded bands and allows users to define client ratios across different bands
  • Airtime fairness that delivers equal airtime access to all WiFi clients, regardless of the client type, wireless chip or operating system
PowerConnect-W-ControllersSelect Networking products carry an Extended Life Warranty with Basic Hardware Service, covering repair or replacement of the product for as long as it remains in use by the customer. In the event of discontinuance of product manufacture, Dell Extended Life Warranty extends until five (5) years after end of product model sales. For more information, visit dell.com/warranty.
PowerConnect-W-ControllersChoose Dell’s premium support service, ProSupport, for 24/7 direct telephone and online access* to advanced-level technicians based in your region. Whether you have one office or hundreds around the world, protect your investments with this simple yet flexible approach.
PowerConnect-W-ControllersWhether you’re looking for payment flexibility to spread IT costs over several budget cycles or you need a scalable financial solution to accommodate your changing technology needs, Dell Financial Services has a wide range of contracting options designed to make technology acquisition easy and affordable. Contact your Dell account manager or DFS representative to learn how financing can help you maximize ROI and lower TCO.
 Dell W-Series Access Points — W-AP224/225

W-Series IAP224/225 802.11ac Access Points

W-Series IAP224 (external antenna) and W-Series IAP225 (internal antenna) are 802.11ac access points, supporting the new 5GHz industry standard for gigabit wireless data rates. These purpose-built 3x3 MIMO 802.11ac access points are designed to deliver blazing fast performance that is up to three times higher than comparable 802.11n access points. Dual-radio configurations enable flexible deployments:
  • 5GHz: 3x3 MIMO for 802.11ac, delivering data rates up to 1.3Gbps
  • 2.4GHz: 3x3 MIMO for 802.11n, delivering data rates up to 450Mbps

The IAP224 and IAP225 each include dual GbE ports to access wired backbones and are powered by Power-over-Ethernet 802.3at (PoE+) or an optional adapter.

 W-Series AP274/275 802.11ac Outdoor Access Points

 

W-Series IAP274/275 802.11ac Outdoor Instant Access Points

W-Series IAP274/275 instant access points (IAPs) are innovative and aesthetic designs that deliver Gigabit WiFi performance to 802.11ac mobile devices. These purpose-built access points are designed to survive harsh outdoor environments, including extreme high and low temperatures as well as persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants. With a maximum data rate of 1.3Gbps in the 5-GHz band and 600Mbps in the 2.4-GHz band, the IAP274/275 outdoor IAPs support concurrent dual-radio operation.

 

 W-Series IAP134/135 Instant Access PointsW-Series IAP134/135 Instant Access Points

Enterprise-grade W-Series IAP134 (external antenna) and IAP135 (internal are the highest-performing W-Series 802.11n dual-radio indoor access points, designed to deliver data rates of up to 450Mbps per radio, up to 900Mbps total for denser environments.
 Dell W-Series Instant Access Points — W-IAP114/115

W-Series IAP114/115 Instant Access Points

W-Series IAP114 (external antenna) and IAP115 (internal antennas) high-performance, dual-radio 802.11n access points designed to deliver data rates up to 450Mbps per radio, suited for medium-density deployments.


 Dell W-Series Instant Access Points — W-IAP108/109W-Series IAP 108/109 Wired + Wireless Instant Access Points

Multifunctional dual-radio W-Series IAP 108 (connecters for external antenna) and W-Series IAP 109 (four integrated antennas) are 802.11abgn, 2x2:2 MIMO access points with instant or remote AP modes for wireless and wired networking in large deployments. With 300Mbps wireless data rate per radio, each IAP features:

  • 10/100/1000BASE-T uplink port
  • 10/100BASE-T local port
  • USB port to connect to 3G and 4G networks
  • Desktop form factor with optional wall/ceiling-mount support
 Dell W-Series Instant Access Points — W-IAP104/105W-Series IAP104/105 Instant Access Points

W-Series IAP104 (external antenna) and W-Series IAP105 (internal antenna) are enterprise-grade dual-radio 802.11n indoor access points designed to deliver data rates of up to 300Mbps per radio, up to 600Mbps total for medium density deployments.
 W-Series IAP103 802.11n Instant Access Points
W-Series
IAP103 Instant Access Points

W-Series I AP103 instant access points (IAPs) provide cost - effective dual-band coverage in medium-density enterprise WiFi environments while minimizing interference from cellular networks. These compact APs deliver wireless data rates up to 300Mbps per radio employing 802.11n technology with two spatial MIMO streams. The I AP103 features a 2.4-GHz and a 5-GHz radio, each with 2x2:2 MIMO and two integrated omnidirectional down-tilt antennas per radio.
 Dell W-Series Instant Access Points — W-AP175


W-Series IAP175 Outdoor Instant Access Points

Enterprise-grade family of mainstream dual-radio 802.11n outdoor access points designed to deliver data rates of up to 300Mbps per radio, up to 600Mbps total. Ideal for campuses, industrial parks and other harsh, outdoor open-air environments, W-Series IAP175 instant access points can be powered via PoE, AC or DC power sources and include convenient wall and mast mounting options as well as a solar shield.

Enterprise-grade portable or desktop 802.11n indoor access points that offer data rates of up to 300Mbps.


W-Series IAP92/93 Instant Access PointsW-Series IAP92/93 Instant Access Points

W-Series IAP92 (external antenna) and W-Series IAP93 (internal antenna) are entry-level, enterprise-grade, single-radio 802.11n indoor access points designed to deliver data rates of up to 300Mbps.
Dell W-Series Instant Access Points — W-IAP3WN/3WNP
W-Series IAP3WN/IAP3WNP Wired + Wireless Instant Access Points

Enterprise-grade portable or desktop 802.11n indoor access points that offer data rates of up to 300Mbps.

W-Series IAP3WN features:
  • Two 10/100Mbps LAN ports
  • One 10/100/1000Mbps WAN port
  • One USB port to connect to external cellular modem
W-Series IAP3WNP has one PoE-capable LAN port that can be used to power an external PoE-enabled device, such as an IP phone.
 Dell W-Series Instant Access Points — W-IAP155/155P 

W-Series IAP155/155P Wired + Wireless Instant Access Points

Dual-band, dual-radio IAPs offering wire-like data rates of up to 450Mbps per radio with instant or remote AP-mode options. The IAP155 and IAP155P each have four ports available to the wired network and a USB port to connect to 3G and 4G networks. The W-Series IAP155P has two Power-over-Ethernet (PoE)-capable LAN ports that can be used to power an external PoE-enabled device, such as an IP phone.
  • Dual-radio, concurrent dual-band access points
  • 2x2 MIMO with two spatial streams and up to 300Mbps wireless data rate in 2.4GHz
  • 3x3 MIMO with three spatial streams and up to 450Mbps wireless data rate in 5GHz
close
 
 
CS03