No-fuss network integration
Simplify FX2 cabling and enhance converged IO and Fibre Channel capabilities for the FX architecture with added full layer 2/3 switch mode.
Network assessments offer a holistic view of your multivendor environment and a reference point for how your infrastructure is performing. Our experts can pinpoint and expose issues in your network using specialized software and diagnostic tools. These unbiased and insightful analytics are aggregated into comprehensive reports that can include recommendations on how to improve performance, optimize devices and remediate problems.
Is your network complex and coiled? Dell can perform a detailed audit and inventory of all multivendor devices in the network to provide visibility and identify configuration issues.
Network Optimization Assessment
Many networks are a multivendor patchwork of devices not running at their optimal state. We can analyze devices from all leading vendors and make recommendations to optimize the entire multivendor design, fine-tune devices and maximize performance of the holistic environment.
Application Performance Assessment
When business applications and databases begin to show signs of latency or completely shut down, we can conduct a comprehensive analysis to uncover performance issues, isolate problems and accelerate troubleshooting of the enterprise infrastructure and software applications.
Moving to a Voice-over-IP (VoIP) solution requires the right network infrastructure to support real-time voice protocols. Simulated load testing, analysis and review can identify the next steps to building a VoIP platform or fixing issues of an existing one.
Network Security Assessment
Safeguard your network from constant attack. Let our experts examine and uncover potential vulnerabilities and provide a comprehensive security design assessment.
Wireless Site Survey
Great wireless connectivity starts with a detailed site survey. Dell can analyze existing infrastructure, identify RF interference and recommend the best design and optimal placement of new devices.
The Dell standardized deployment service guarantees that setup and optimization are done correctly so that you can launch faster and focus on daily business.
Expert planning and execution seamlessly weaves Dell’s open systems architecture with existing network infrastructure from Cisco, HP, Juniper and others. Choose ProDeploy Plus, the most complete deployment offer on the market for complex environments.
Setting up network protocols, and policies can be tricky. Dell certified network engineers can configure and optimize your new hardware remotely or on-site and get new technology up and running fast .
Mounting and cabling of wired and wireless devices can be tedious and time-consuming. Get worry-free hardware installations with experienced Dell technicians who do deployments every day .
Dell offers a variety of on-site and remote support options that can be added at time of purchase. Dell ProSupport ensures problems are diagnosed and resolved by experts.
|On-site and Remote Assistance|
Get immediate access to Dell ProSupport professionals who can help you troubleshoot and diagnose issues that may arise in your network.
Free yourself to focus on the business and allow Dell to manage your network with dedicated professional support.
Learn practical knowledge and operational techniques.
Dell network consulting provides on-site or remote access to highly skilled professionals who provide project assistance and guidance across a variety of technologies for a specific project or timeframe.
Get professional insight with a half-day collaborative whiteboard session to discuss potential improvements.
For those times when you need a little extra technical guidance, certified experts are available to discuss system design or help resolve complex issues that can be billed by the day, week or by the phone call. Time-based consulting is as flexible as you are.
• Access Distribution Networking
• Gateway and Security
• Microsoft Exchange
• Wireless Networking
• Systems Management
• Core Layer/MPLS Networking
• Data Protection and Recovery
• Storage Area Networking (SAN)
• Storage Technologies
Reduce cable complexityThe FN IO Module (FN IOM) is designed specifically for the PowerEdge FX2 converged-infrastructure chassis, part of the PowerEdge FX architecture. Supporting up to two FN IOMs per chassis, the FX2 converged infrastructure also includes up to 8 x 10GbE internal ports, plus redundant cooling fans and power supplies.
The FN IOM can simplify FX2 connectivity by as much as 8-to-1, greatly reducing cabling complexity. Plug-and-play convenience with zero-touch and preconfigured features enables layer 2 control. This allows fast, easy network deployment using the Dell Blade IO Manager, with additional management of the FN IOM through a CLI using the Dell Networking OS 9, enabling full layer 3 switching functions.
The FN IO Module has the ability to operate in two separate modes.
- Plug-and-play mode designed for administrators to configure the FN IOM without having to configure networking settings. The device is managed through the Dell Blade IO Manager’s simple GUI interface.
- Full switch mode, enabling layer 3 switch functions. This allows Dell OS 9 command line interface control, including routing protocols, multicast features, access control lists, IPv4 and IPv6 support, and OpenFlow capabilities for software-defined networking.
In addition to the eight 10GbE internal ports, the FN IOM supports uplink-port link aggregation group (LAG) and virtual link trunking (VLT).
Simplify converged IO and Fibre Channel connectivityChoose the right module for your environment and simplify connectivity with your choice of external port configurations.
• SFP+ (FN410s): Connect over long distances and minimize latency via optics with 4 x 10GbE SFP+ ports.
• 10GBASE-T (FN410t): Support cost-effective copper media up to 100 meters with 4 x 10GBASE-T ports.
• FC/SFP+ combination (FN2210s): Enable convergence directly within the FX2 enclosure, while reducing
cabling and adapters, with a combination of two 2/4/8Gbps Fibre Channel ports* plus two 10GbE SFP+ ports
(up to four 10GbE SFP+ ports with reboot).
Enable and ease LAN/SAN convergenceFull data center bridging (DCB) support with zero-touch converged IO activation enable an automated LAN/SAN converged system that connects server nodes to upstream switches. The solution can:
• Reduce cabling up to 75 percent
• Remove up to 50 percent of your existing LAN/SAN adapters
• Decrease upstream top-of-rack (ToR) ports by up to 75 percent
In addition, the FN IOM easily connects to the Dell Networking S5000 10/40GbE Switch that features up to 64 SFP+ ports and up to 12 Fibre Channel ports with full Fibre Channel fabric services support
Choose Dell’s premium support service, ProSupport, for 24/7* direct telephone and online access to advanced-level technicians based in your region. Whether you have one office or hundreds around the world, protect your investments with this simple yet flexible approach.
|FN410s 4-port SFP+ IO Module|
• 4 ports of SFP+ 10GbE connectivity
• Supports optical and DAC cable media
|FN410t 4-port 10GBASE-T IO Module|
• 4 ports of 10GBASE-T connectivity
• Supports cost-effective copper media up to 100 meters
|FN2210s 4-port Combination Fibre Channel/Ethernet IO Module |
• Up to 2 ports of 2/4/8Gbps Fibre Channel* plus 2 ports of
• Up to 4 ports SFP+ 10GbE (with reboot)
• NPG fiber channel and full fiber channel fabric services
|Port attributes||4 line-rate fixed 1GbE/10GbE SFP+ ports - Supported||4 line-rate fixed 100Mb/1Gb/10Gb BASE-T ports (supports auto-negotiation) - Supported||2 line-rate fixed 2/4/8Gb Fiber Channel ports with 2 line-rate 1GbE/10GbE SFP+ ports (default mode) or 4 line-rate fixed 1GbE/10GbE SFP+ ports (Ethernet mode) - Supported|
The following applies to all FN IO Aggregator models:
Up to 8 line-rate 10GbE server facing ports
Native 1GbE/10GbE is supported when IOA is in Manual Mode
1 USB (Type A) port for storage
1 USB (Type A) port for console/management
MAC addresses: 64K
Switch fabric capacity: 240 Gbps (Full-Duplex)
Forwarding capacity: 179 Mpps
Link aggregation: Up to 12 members per group, 24 LAG groups with stack support
In standalone mode: max 4 members per group and 1 uplink LAG group (Port-channel 128 default mode)
In stacking mode: max of 12 members per group and 1 uplink LAG group (stacking mode with FN410S and FN410T)
In PMUX mode: max of 24 LAG groups and multiple uplink LAG groups
In full-switch mode: max of 24 LAG groups and multiple uplink LAG groups
Line-rate Layer 2 switching: All protocols, including IPv4
Line-rate Layer 3 routing* : IPv4 and IPv6
Packet buffer memory: 4MB
CPU memory: 2GB
ACLs ingress egress in full switch mode
Stacked units: Up to 6 IOAs (using 10GbE ports deployed via CLI)
Stacking bandwidth: Up to 40Gbps (using 1 x 10GbE ring)
Stacking topology: Ring and daisy chain
Virtual Link Trunking (VLT): mVLT and L2 over VLT (deployed via CLI)
VLT supported in VLT, PMUX and Full-switch mode
Stacking supported in stacking, PMUX and Full-switch mode with FN410S and FN410T
802.1p L2 Prioritization
802.3ab Gigabit Ethernet (1000Base-T)
802.3ad Link Aggregation with LACP
802.3ae 10GbE (10GBase-X)
802.3u Fast Ethernet (100Base-TX)
802.3x Flow Control
802.3z Gigabit Ethernet (1000Base-X)
802.1Q VLAN tagging
802.3ac frame extensions for VLAN tagging
802.1D Bridging, STP*
Layer 3 Routing - full switch mode
2154 MD5 (OSPF)
1587 NSSA (OSPF)
4222 Prioritization and congestion avoidance
4552 OSPFv3 IPsec authentication
1997 BGP Communities
2385 BGP MD5
2439 BGP Route Flap Damping
2796 BGP Route Reflection
2918 BGP Route Refresh
3065 BGP Confederations
4360 BGP Extended Communities
4893 BGP 4-byte ASN
5396 BGP 4-byte ASN representations
draft-ietf-idr-restart-06 BG P Graceful Restart
1195 Routing IPv4 with IS-IS
5308 Routing IPv6 with IS-IS
FCoE Initialization Protocol (FIP) v1
FCoE Transit (FIP Snooping Bridge) supported with FN410S, FN410T
Native FCoE forwarding
NPIV Proxy Gateway (NPG) supported with FN2210S
FCoE-FC forwarding / FPORT – Supported only with FN2210S
Dynamic FCoE to FC Load balancing
Data center bridging
IEEE 802.1Qbb Priority-Based Flow Control (PFC)
IEEE 802.1Qaz Enhanced Transmission Selection (ETS)
Data Center Bridging eXchange (DCBx)
DCBx Application TLV (iSCSI, FCoE)
2474 Differentiated Services
4807 IPSec SPD MIB
General IPv4 Protocols
1027 Proxy ARP*
1035 DNS (client)*
1042 Ethernet Transmission
1191 Path MTU Discovery*
1542 BOOTP (relay)*
1858 IP Fragment Filtering*
2131 DHCP (relay, client, server)*
3021 31-bit Prefixes
3046 DHCP Option 82*
3069 Private VLAN*
3128 Tiny Fragment Attack Protection
General IPv6 Protocols
1858 IP Fragment Filtering*
2461 Neighbor Discovery*
2675 Jumbograms (partial)*
3587 Global Unicast Address Format*
2462 Stateless Address Autoconfiguration (partial)*
4861 IPv6 Host for management port
1981 IPv6 Path MTU discovery*
4541 IGMPv1/v2 Snooping
3569 SSM for IPv4*
4541 IGMPv1/v2 Snooping
3376 IGMPv3 draft-ietf-pim-sm-v2-new-05 PIM-SM*
Openflow 1.0 with extensions*
1156 Internet MIB*
1212 Concise MIB Definitions*
1215 SNMP Traps*
1493 Bridges MIB*
1850 OSPFv2 MIB*
1901 Community-based SNMPv2
2011 IP MIB*
2012 TCP MIB*
2013 UDP MIB*
2096 IP Forwarding Table MIB*
2571 Management Frameworks*
2572 Message Processing and Dispatching*
2575 SNMPv3 VACM*
2576 Coexistence Between SNMPv1/v2/v3
2579 Textual Conventions for SMIv2*
2580 Conformance Statements for SMIv2*
2618 RADIUS Authentication MIB*
2665 Ethernet-like Interfaces MIB*
2787 VRRP MIB 2819 RMON MIB (groups 1, 2, 3, 9)*
2863 Interfaces MIB*
3273 RMON High Capacity MIB*
3418 SNMP MIB
3434 RMON High Capacity Alarm MIB*
ANSI/TIA-1057 LLDP-MED MIB*
IEEE 802.1AB LLDP MIB*
IEEE 802.1AB LLDP DOT1 MIB*
IEEE 802.1AB LLDP DOT3 MIB*
Power supply: 100–240V AC 50/60Hz
Max. thermal output: 955.36 BTU/h
Max. current draw per system: 2A at 100/120V AC, 1A at 200/240V AC
Max. power consumption: 123 Watts
ISO 7779 A-weighted sound pressure level: 59.6dBA at 73.4°F (23°C)
Operating temperature: 32° to 140°F (0° to 60°C)
Operating humidity: 10 to 85% (RH), non-condensing
Max. non-operating specifications:
Storage temperature: –40° to 158°F (–40° to 70°C)
Storage humidity: 5 to 95% (RH), non-condensing
UL/CSA 60950-1, Second Edition
EN 60950-1, Second Edition
IEC 60950-1, Second Edition Including all National
Deviations and Group Differences
EN 60825-1 Safety of Laser Products Part 1:
Equipment Classification Requirements and
User’s Guide Optical Fibre Communication Systems
FDA Regulation 21 CFR 1040.10 and 1040.11 Emissions
Australia/New Zealand: AS/NZS CISPR 22: 2006, Class A
Canada: ICES-003, Issue-4, Class A
Europe: EN 55022: 2006+A1:2007 (CISPR 22: 2006), Class A
Japan: VCCI V3/2009 Class A
USA: FCC CFR 47 Part 15, Subpart B:2009, Class A
EN 300 386 V1.4.1:2008 EMC for Network Equipment
EN 55024: 1998 + A1: 2001 + A2: 2003
EN 61000-3-2: Harmonic Current Emissions
EN 61000-3-3: Voltage Fluctuations and Flicker
EN 61000-4-2: ESD
EN 61000-4-3: Radiated Immunity
EN 61000-4-4: EFT
EN 61000-4-5: Surge
EN 61000-4-6: Low Frequency Conducted Immunity
All components are RoHS compliant
Regulatory and environment compliance
Product Safety, EMC and Environmental Datasheets
Dell Regulatory Compliance Home Page
Dell and the Environment
* Available with full-switch mode