Performance per watt and efficiency that can't be beaten
Environments needing to consolidate computing resources to maximize efficiency. Ultra dense servers, easy to deploy and manage, while minimizing energy and cooling consumption
- External Storage Options:
For information about Dell external storage options, visit Dell.com/Storage.
- Brocade Switch M5424
- Up to six 3000W high-efficiency power supplies, six 2700W high-efficiency power supplies or up to six -48V DC 2700W power supplies.
Based on Dell’s Energy Smart technologies, the M1000e power supplies deliver greater levels of efficiency, even at low levels of utilization. Supported power supply configurations include:
• 3+3 and 2+2 (grid redundancy)
• 2+1, 3+1, 4+2, and 5+1 (power supply redundancy)
• 2+0 and 3+0 (non-redundant mode)
The M1000e chassis supports dynamic power supply engagement (DPSE) mode, which if enabled, puts lightly loaded power supplies into standby mode, driving up the utilization and the efficiency of the active supplies. Dell supports either 110–120V or 208–240V AC power supply input and supports a wide range of power distribution options. Dell recommends 208–240V AC for all production environments.
- Form Factor: 10U modular enclosure holds up to sixteen half-height blade servers
44.0cm(17.3”)H x 44.7cm(17.6”)W x 75.4cm(29.7”)D
Empty Chassis only – 98lbs (44.5kg)
Chassis w/ all rear modules (IOMs, PSUs, CMCs, KVM) - 176lbs (79.8kg)
Max Fully loaded w/ blades and rear modules - 394lbs (178.7kg)
M1000e Chassis comes standard with 9 hot pluggable, redundant fan modules
Based on Energy Smart Technologies, M1000e fans are a breakthrough in power and cooling efficiency.
The fans deliver low power consumption, but also use next generation “low flow” technology to ensure the
lowest possible amount of fresh air is consumed to cool the enclosure
Front Control Panel with interactive Graphical LCD
Supports initial configuration wizard
Local server blade, enclosure, and module information and troubleshooting
Two USB Keyboard/Mouse connections and one Video connection (requires the optional Avocent iKVM switch
to enable these ports) for local front “crash cart” console connections that can be switched between blades
- 1 (standard) or optional 2nd (redundant) Chassis Management Controller(s) (CMC) that provide:
Single secure interface for inventory, configuration, monitoring, and alerting for the chassis and all components
Multi-chassis management capability allows up to nine chassis and 288 servers to be managed from a single, embedded, agent-less interface
Enables automated and embedded one-to-many blade BIOS and firmware updates, independent of the OS through iDRAC
Allows one-to-many blade server BIOS capture and replication
Real-Time Power/Thermal Monitoring and Management
Real-Time System AC Power Consumption with resettable peak and minimum values
System-level power limiting and slot-based power prioritization
Manages Dynamic Power Engagement functionality that can help to lower overall system power consumption by ensuring power supplies run at their optimal efficiency points
Manages fan speed control using Dell’s enhanced efficiency technologies to ensure fans are delivering optimal cooling while minimizing power consumption and airflow
Secure Web (SSL) and Command Line (Telnet/SSH) interfaces
Supports multiple levels of user roles and permissions, including integration into Microsoft® Active Directory® Services and Lightweight Directory Access Protocol (LDAP) services for authentication
2 x 10/100/1000Mb Ethernet ports + 1 serial port
Provides single point of connection from management network to iDRAC on each of the blades and the management interfaces on the integrated I/O modules
2nd Ethernet port supports daisy chaining of CMCs for improved cable management
Optional Integrated Avocent® keyboard, video and mouse (iKVM) switch
Enables USB keyboard/mouse and video port on front control panel
Dell OpenManage Server Administrator—monitoring agents and 1:1 management utilities
Dell OpenManage Essentials—discover, inventory, monitor, and update M1000e chassis and blades
Integration with third-party management solutions through Dell’s Certified Partner Program
A new era for blade serversHelp reduce the cost and complexity of managing blade resources with the PowerEdge™ M1000e blade enclosure.
Take charge of your blade environment with the integrated management tools that help make the M1000e one of the most effective blade-server products in the industry.
Find Out More
Flexible remote management
Tailor your PowerEdge™ blade management with the Chassis Management Controller to best suit your needs over your entire blade infrastructure, in a single data center or around the world.
Find Out More
Help increase capacity, lower operating costs and deliver better performance per watt with the PowerEdge™ M1000e.
Find Out More
Grow with easeExpand your data center with a flexible and scalable system designed to support future generations of blade technologies.
Meet your growing data center performance demands with the advanced input/output (I/O) functionality and flexible scalability of the PowerEdge™ M1000e Blade Enclosure.
Find Out More
Simplified product integration
Limit your downtime with Dell™ FlexAddress, which can greatly streamline the process of integrating new servers and other components into the enclosure.
Find Out More
The new-generation PowerEdge experience
Make IT the engine for your business success. The newest generation PowerEdge™ family is engineered with the right combination of features and performance scalability to handle tough workloads for both large and small data center environments.
Improve operational efficiency with enhanced systems management
Global Services and Support
Only Dell M-Series provides complete, snap-in FlexIO scalability down to the switch interconnects. FlexIO technology is the foundation of the M1000e I/O subsystem that has the flexibility you need to design today’s solution and the scalability you require to add or change data center options to meet future demands.
The M-Series enclosure supports a broad set of modular gigabit Ethernet (GbE), 10GbE and Enhanced Ethernet blade switches.
Dell's fully modular Ethernet switches provide great flexibility, with choices of 1Gb to 10Gb speeds, flexible modular uplinks of varying media types, and many other valuable features. This portfolio offers a selection of switches that can meet even the most extreme networking demands.
For Cisco Catalyst customers, Dell provides models that span from simple, no frills GbE to more capable models with stacking or even 10GbE uplinks. The more advanced switches feature Cisco's Virtual Blade Switch functionality, enabling you to interconnect up to nine switches to create a single logical switch, thereby simplifying data center management.
Brocade 16Gb Fibre Channel Switches provide powerful connectivity to Fibre Channel SANs, such as those offered by Dell/EMC. The M5424 includes 16 internal and 8 external fabric port options as well as a performance pack for enhanced features and management.
For heterogeneous integration into any Fibre Channel network, the Brocade M5424 Fibre Channel switch can even be enabled in Access Gateway mode. Based on N_Port ID Virtualization (NPIV) functionality, Access Gateway mode delivers the cable aggregation benefits and cost savings offered by Dell’s M-Series blade solutions without separate management or configuration requirements.
For high-performance computing (HPC) or other environments requiring the highest bandwidth and lowest latency available, the M-Series offers InfiniBand™ switches and adapter cards. Dell offers chassis-integrated quad data rate (QDR) and fourteen data rate (FDR) InfiniBand switches from Mellanox, with speeds of up to 56Gbps. Each switch features 16 internal ports and 8 external ports to ensure the availability and redundancy needed for the most demanding applications.
FlexIO for M-Series: Delivering the speed you need, when you need it.
Global Services and SupportDell offers a wide range of professional services to simplify the assessment, design, implementation, management and maintenance of your IT environment to help you transition from platform to platform.
Dell Support Services
Dell ProSupport offers a suite of support services that enable you to choose support models based on how you use technology and where you want to allocate resources. We recommend Dell ProSupport Plus with SupportAssist for mission-critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. For hyper-scale data centers, we also offer ProSupport Flex for Data Center.
Dell Enterprise Deployment Services
ProDeploy Enterprise Suite* offers a full range of deployment services and professional certifications to help you get more out of your technology starting on day one. Choose ProDeploy Plus for the most complete deployment offer available in the market, ProDeploy for expert configuration and installations, or Basic Deployment for worry-free hardware installations.
Dell Education Services aims to complement your relationship with Dell as a trusted partner by offering Education Services for our own products, for industry leading infrastructure solutions and for the ongoing development of your organization. It is a global organization with local representation, classrooms and web-based training available worldwide.
Contact your Dell representative today for more information or click here.
|The Dell OpenManage systems management portfolio, including Dell PowerEdge server embedded management feature integrated Dell Remote Access Controller (iDRAC) with Lifecycle Controller, helps IT Administrators efficiently manage Dell servers in physical, virtual, local and remote environments, operating in band or out of band, with or without a systems management software agent. Irrespective of the operating system or hypervisor you deploy, iDRAC with Lifecycle Controller automates the most essential and frequently performed server management tasks to help your IT resources become more productive and your IT environment more cost-effective and well-maintained. Dell OpenManage also integrates and connects to leading third-party systems management solutions you may already own, so you can maintain your single point of control and capitalize on your existing investment.|
Solutions and Systems Management
|With Dell Compellent, Dell EqualLogic and Dell PowerVault, we have created a comprehensive and innovative portfolio of storage products, all of which are easy to deploy, manage and grow. Whether you use network attached storage (NAS), direct attached storage (DAS), internet SCSI (iSCSI) or Fibre Channel (FC), Dell has a product that can meet your business needs and reduce the cost and complexity of storage.|
|The Value of Dell Storage: |
Dell’s open, standards-based solutions let customers of all sizes integrate new technologies without sacrificing performance or their existing IT investments.
|Direct-Attached Storage: |
The Dell PowerVault MD storage family offers easy and economical expansion for Dell PowerEdge servers enabling high availability and scalability for demanding business applications.
|Disk-to-Disk Backup |
Due to expanding volumes of data that must be backed up and protected along with shrinking backup windows, many IT departments have moved to or added disk-based backups.
|Network-Attached Storage |
NAS is a specialized storage server with its own IP address that is made available to multiple clients and servers on a local area network (LAN) or wide area network (WAN).
|Object-Based Storage |
The Dell DX Object Storage Platform is designed to intelligently access, store, protect and distribute fixed digital content.
|Storage Area Network |
A storage area network (SAN) is a network of shared storage devices, such as disk storage arrays and tape automation
|Tape Backup |
Considered the first and last line of defense against data loss, tape and removable disks can be used for long-term data storage and backup.
|Unified Storage |
Unified Storage is a term that describes the ability to manage both file- and block-level data.