Versatile, high-capacity direct-attached storage DAS
Customers seeking versatility and high-capacity storage for mainstream applications with optimal performance in sequential (streaming) applications.
Up to twelve (12) hot-pluggable SAS Hard Disk Drives (HDDs) at 7.2K, 10K and 15K rpm and SAS Solid State Drives (SSDs)
Drive performances and capacities
3.5” 6Gbps SAS:HDD 15K – 300GB, 450GB, 600GB
HDD 7.2K – 1TB, 2TB, 3TB, 4TB
HDD 7.2K NL-SAS 512e – 6TB
3.5” 12Gbps SAS:
HDD 7.2K NL-SAS 512e – 6TB, 8TB, 10TB
2.5” 6Gbps SAS with 3.5” carrier:HDD 10K – 300GB, 600GB, 900GB, 1.2TB
HDD 10K 512e– 1.8TB
SSD – 400GB mainstream SLC
SSD – 200GB, 800GB value SLC
SSD – 800GB RI MLC
SSD – 200GB, 400GB WI SLC
2.5” 12Gbps SAS with 3.5” carrier:7.2K HDD NL-SAS 512e – 2TB
SSD – 200GB, 400GB, 800GB, 1.6TB MU MLC
SSD – 200GB, 400GB, 800GB WI MLC
SSD – 800GB, 1.6TB RI MLC
Maximum Capacity (per enclosure)Up to 120TB when using 12 x 10TB NL-SAS 3.5" HDDs
PERC H810 Host-RAID adapter enables expansion to 8 enclosures (4 enclosures per port)
- Support for the following configurations:
Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H810 (4 enclosures per port, single path)
Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERC H810 (4 enclosures connected to both ports via redundant path cabling)
Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 through 5 and a separate connectivity to drives 6 through 11.
- Refer to RAID Card for details on supported Operating Systems:
8.7cm (3.43 inches)
48.2cm (18.98 inches)
59.4 (23.39 inches)
28.39 kg (62.6 lb) (maximum configuration)
8.84 kg (19.5 lb) (empty)
- Two fully redundant power supplies; supports DC power
Wattage: AC - 600 W; DC – 700 W
Heat dissipation: AC - 2047BTU/hr; DC - 2388 BTU/hr
Voltage: 100-240 VAC, auto sensing; 48V DC
Frequency: 50/60 Hz
Amperage: 8.6 A at 100 V, 4.3 A at 240 V
Available Drive Power (per slot)
Supported drive power consumption (continuous):
up to 1.16 A at +5V
up to 1.6 A +12V
- 2 Enclosure Management Modules(EMM) provide redundant enclosure management capability
Environmental Operating Conditions
Operating: 10° to 35°C (50° to 95°F) with maximum temp gradation of 10°C per hour
Storage: -40° to 65°C (-40° to 149°F) with temp gradation of 20°C per hour
Supports Fresh Air cooling, up to 35 degrees Celsius
Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hour
Storage: 5% to 95% (non-condensing)
Operating: -16 to 3048 m (-50 to 10,000 ft)
Storage: -16 to 10,600 m (-50 to 35,000 ft)
Expansion for Mainstream and Capacity-Intensive Single Server ApplicationsDell PowerVault MD1200 direct-attached storage array is the second generation of Dell’s low-cost, high-capacity expansion enclosure that improves density, versatility and performance over previous generation to enhance support for mainstream and capacity-intensive applications.
The PowerVault MD1200 offers seamless expansion for Dell PowerEdge servers with the and provides you with the most drive flexibility of any Dell direct-attach storage arrays.
Easily Expand Your Server Capacity: The PowerVault MD1200 is engineered to seamlessly expand the capacity of Dell PowerEdge servers. This expansion array can support twelve, 3.5- or 2.5-inch SAS hard-disk drives (HDDs) or solid-state drives (SSDs) in a 2U array and expands up to 8 arrays behind a single .
Versatility and Flexibility to Meet Most Business Needs: The PowerVault MD1200 is Dell’s most versatile direct-attached storage array. Featuring support for 2.5 inch drives, as well as the ability to mix 2.5-inch and 3.5-inch enclosures behind a single PERC H800 Host-RAID adapter, PowerVault MD1200 delivers capacity and performance to support most customer deployments.
Support the Business, No Matter the Need
The PowerVault MD1200 supports most mainstream business requirements with added flexibility and versatility to mix 2.5-inch drives in a 3.5-inch enclosure and mix 2.5- and 3.5-inch enclosures behind a single .
Keeping Your Data Safe
Access and accuracy of your data is key to the success of any business. The PowerVault MD1200 has been engineered to help maximize your uptime and security of your data.
|Redundant Path with I/O Load Balancing: You can rest assured that your data will be available when you need it. Even if a single cable path fails from one port of the PERC H810, you will continue to have access to your data through the second port.|
|Self-Encrypting Drives (SED): Self-encrypting drives help to ensure that your data is secure with drive-level encryption, so, even if a drive is removed from its storage system or the server in which it is housed, the data on the drive is encrypted and rendered useless to anyone who attempts to access it without the appropriate security authorization. Additionally, SED supports instant secure erase of drives, which permanently removes data when repurposing or decommissioning drives.|
|Hot-Swappable Drives: With hot-swappable drives, you can remove and replace drives even when your system is operating. No need to shut down, and no need to reboot: New drives are available right away|
Leveraging the PERC H800 RAID ControllerThe PowerVault MD1200 leverages the with the latest PCI Express 2.0 interface, offering excellent performance for enterprise.
- The configuration of the PERC H800 Host-RAID adapter helps to increase reliability and fault tolerance by enabling the software to recognize the entire array as a single unit, regardless of how many disks are activated for storage in the array. With the PERC H800, customers can choose the RAID option that supports their application. The PERC H800 supports RAID levels 0, 1, 5, 6, 10, 50 and 60.
- Dell PowerVault MD1200 storage array is engineered to work optimally with Dell PowerEdge servers. Dell OpenManageTM Storage Manager Software can manage both the external array and internal storage within the server itself.
- Streamlining storage management through a single, common interface helps reduce resource load on the system, and is easier to navigate for the user as well. The PowerVault MD1200 utilizes the same 2.5-inch and 3.5-inch drives as 11th Generation PowerEdge servers, and the same power supplies and fans as the PowerVault MD1220, helping to reduce the number of spares required.
- The PowerVault MD1220 is supported behind the following servers: R210,T310,T410,R410,R510,R610,T610,R710,T710,R910,R810. See PERC H800 server compatability matrix for a list of currently supported servers.
Service and SupportHaving the right backup solution is key to protecting your critical information. So is having the right support. Dell™ ProSupport™ is a portfolio of globally consistent, customer-driven support services that provides businesses of all sizes with flexible, reliable and easier support solutions.
Dell ProSupport starts with the Dell ProSupport for IT service model designed for IT professionals like you. Dell ProSupport for IT provides:
- 24x7 Direct access to Dell Expert Centers
- Fast-track dispatch for Dell-certified technicians
- Escalation management through Dell’s Global Command Centers
Next, Dell ProSupport Options align to the way you use technology — rapidly responding to your needs, protecting your investment, productivity and sensitive data, and providing enhanced proactive support services to reduce the risk and complexity of managing your infrastructure.
Speed of response
|Mission Critical* — Perfect for server and storage environments where avoiding unplanned downtime and reducing recovery time through priority response are a must. The package includes priority 4-hour on-site*service or optional 2-hour response with 6-hour hardware repair, Dell’s proven Critical Situation process and emergency dispatch.||Keep your hard drive* — Enables you to control your sensitive data by retaining your hard drive and helps you comply with current data privacy regulations to help mitigate risks associated with regulatory or civil liabilities.||Enterprise-wide contract — Provides enhanced proactive capabilities through:|
Proactive maintenance — Maximizes the availability and stability of your infrastructure proactively. The package includes a detailed system assessment and implementation of driver or firmware updates and upgrades for your server or storage systems.
Remote advisory options — Provides telephone and internet access to technical expertise for specialized applications and solutions such as Microsoft® Exchange, Virtualization and more.
Basic Hardware Warranty*
Ideal for nonessential application environments. This service offers business-hour, phone-based support for hardware-only issues with Next Business Day On-Site Service following completion of phone-based troubleshooting.
Dell Education Services
Decrease downtime, improve utilization and ensure business continuity with storage training from Dell Education Services. A self-paced online training course jump starts the Storage Administrator on managing the PowerVault MD Storage environment.
Additional service offerings
Comprehensive storage training and certification
Through comprehensive storage training courses, Dell provides expertise in implementing Dell storage into an existing IT infrastructure. If you are interested in validating or maintaining your skill set for company compliance, the Dell-certified Network Storage Networking Professional Certification path is available.
Backup and recovery
To sustain the continued operation of your storage solution, you should engineer availability, security and reliability into every process from the outset. Dell can provide backup and recovery solutions that help ensure adequate procedures are in place to minimize or avoid data loss.
Our storage experts analyze existing infrastructure, operational practices and technical readiness to develop a roadmap for conducting a storage consolidation. They will also develop a detailed consolidation deployment plan as well as a validated and refined solution design.