Focus your end-user network
Fully managed Layer 2 switching with Open Networking capabilities for third party OS support.
PoE/PoE Ports
- PoE/PoE+ Standard Traffic-Port Attributes:
Integrated 2.5GbE ports: N/A
N1108P-ON:
1GbE Port Attributes Multi-speed:
8x 10/100/1000Mbps half/full duplex ports
1GbE Port Attributes Single-speed:
2x 1000Mbps half/full duplex RJ45 ports
Integrated 1GbE SFP dedicated ports: 2
Integrated 10GbE SFP+ dedicated ports (10 Gbps): N/A
Power-over-Ethernet Plus (PoE/PoE+) Ports: 4
N1124P-ON:
1GbE Port Attributes Multi-speed:
24x 10/100/1000Mbps half/full duplex ports
1GbE Port Attributes Single-speed: N/A
Integrated 1GbE SFP dedicated ports: N/A
Integrated 10GbE SFP+ dedicated ports (10 Gbps): 4
Power-over-Ethernet Plus (PoE/PoE+) Ports: 12
N1148P-ON:
1GbE Port Attributes Multi-speed:
48x 10/100/1000Mbps half/full duplex ports
1GbE Port Attributes Single-speed: N/A
Integrated 1GbE SFP dedicated ports: N/A
Integrated 10GbE SFP+ dedicated ports (10 Gbps): 4
Power-over-Ethernet Plus (PoE/PoE+) Ports: 24
PoE Power Budget
N1108P-ON: 75W
N1124P-ON: 190W
N1148P-ON: 375W
Switch Attributes
- Line-rate Layer 2 switching
Dual firmware images on-board
Temperature sensors for environmental monitoring
Cable diagnostics
Switch auditing support
CPU Memory: 1GB
Flash Memory: 1GB
PoE/PoE+:
N1108P-ON:
Switch Fabric Capacity (full duplex): 24Gbps
Forwarding Rate: 18Mpps
Packet Buffer Memory: 1.5MB
N1124P-ON:
Switch Fabric Capacity (full duplex):128Gbps
Forwarding Rate: 96Mpps
Packet Buffer Memory: 2MB
N1148P-ON:
Switch Fabric Capacity (full duplex):176Gbps
Forwarding Rate: 132Mpps
Packet Buffer Memory: 2MB
Non-PoE:
N1108T-ON:
Switch Fabric Capacity (full duplex): 24Gbps
Forwarding Rate: 18Mpps
Packet Buffer Memory: 1.5MB
N1124T-ON:
Switch Fabric Capacity (full duplex):128Gbps
Forwarding Rate: 96Mpps
Packet Buffer Memory: 2MB
N1148T-ON:
Switch Fabric Capacity (full duplex):176Gbps
Forwarding Rate: 132Mpps
Packet Buffer Memory: 2MB
Stacking Attributes
Maximum stacking distance (meters): 3
Maximum stacking speed (full-duplex): 176Gbps
8 port switch is not stackable
10G SFP+ ports needs to be configured for stacking
24 and 48 port T and P switches can be mixed in a stack
Port Attributes
- Traffic-Port Features:
Auto-negotiation for speed and flow control
Auto MDI/MDIX
Port mirroring
Flow-based port mirroring
Broadcast storm control
Energy Efficient Ethernet per port settings
Port Profile support including Admin profiles
Management & Configuration-Port Attributes:
1 USB (Type A) port for configuration
Non-PoE:
Non-PoE Standard Traffic-Port Attributes:
Integrated 2.5GbE ports: N/A
N1108T-ON:
1GbE Port Attributes Multi-speed:
8x 10/100/1000Mbps half/full duplex RJ45 ports
1GbE Port Attributes Single-speed:
2x 1000Mbps half/full duplex RJ45 ports
Integrated 1GbE SFP dedicated ports: 2
Integrated 10GbE SFP+ dedicated ports: N/A
N1124T-ON:
1GbE Port Attributes Multi-speed:
24x 10/100/1000Mbps half/full duplex RJ45 ports
1GbE Port Attributes Single-speed: N/A
Integrated 1GbE SFP dedicated ports: N/A
Integrated 10GbE SFP+ dedicated ports: 4
N1148T-ON:
1GbE Port Attributes Multi-speed:
48x 10/100/1000Mbps half/full duplex RJ45 ports
1GbE Port Attributes Single-speed: N/A
Integrated 1GbE SFP dedicated ports: N/A
Integrated 10GbE SFP+ dedicated ports: 4
Dimensions
- N1108P-ON/ N1108T-ON:
Dimensions in inches (H x W x D):
1.75 in x 8.5 in x 10 in
Dimensions in millimeters (H x W x D):
44.45 mm x 215.9 mm x 254 mm
N1124P-ON/ N1124T-ON:
Dimensions in inches (H x W x D):
1.75 in x 17 in x 10 in
Dimensions in millimeters (H x W x D):
44.45 mm x 431.8 mm x 254 mm
N1148P-ON/ N1148T-ON:
Dimensions in inches (H x W x D):
1.75 in x 17 in x 10 in
Dimensions in millimeters (H x W x D):
44.45 mm x 431.8 mm x 254 mm
Chassis
- PoE/PoE+:
N1108P-ON:
Approximate Weight in pounds: 4.43lbs
Approximate Weight in kilograms: 2.01kg
Power Supply (Watts): 104W AC (24W switch + 80W PoE)
Max Thermal Output (BTU/hr): 292.62
N1124P-ON:
Approximate Weight in pounds: 8.33lbs
Approximate Weight in kilograms: 3.78kg
Power Supply (Watts): 250W AC
Max Thermal Output (BTU/hr): 851.66
N1148P-ON:
Approximate Weight in pounds: 9.19lbs
Approximate Weight in kilograms: 4.17kg
Power Supply (Watts): 500W AC
Max Thermal Output (BTU/hr):1566.15
Non-PoE:
N1108T-ON:
Approximate Weight in pounds: 3.54lbs
Approximate Weight in kilograms: 1.61kg
Power Supply (Watts): 24W AC
Max Thermal Output (BTU/hr): 35.72
Power Consumption Max (Watts): 10.47
N1124T-ON:
Approximate Weight in pounds: 6.72lbs
Approximate Weight in kilograms: 3.05kg
Power Supply (Watts): 40W AC
Max Thermal Output (BTU/hr): 65.85
Power Consumption Max (Watts): 19.3
N1148T-ON:
Approximate Weight in pounds: 8.33lbs
Approximate Weight in kilograms: 3.78kg
Power Supply (Watts): 60W AC
Max Thermal Output (BTU/hr): 102.98
Power Consumption Max (Watts): 30.18
Environmental Operating Conditions
Operating Temperature in Celsius: 0° to 45° C
Operating Temperature in Fahrenheit: 32° to 113° F
Storage Temperature in Celsius: -40° to 65° C
Storage Temperature in Fahrenheit: -40° to 149° F
Operating Relative Humidity: 95%
Storage Relative Humidity: 85%
Power Supply Efficiency: 80% or better in all operating modes
Power
Integrated power supply (not removable): standard
Air flow: IO to PSU (Normal)
Modernize with open networking
All N-Series switches include Dell EMC Networking OS 6, designed for easier deployment, greater interoperability and a lower learning curve for network administrators. In addition to supporting the Open Network Install Environment (ONIE) allowing for installation of alternate network operating systems, the N1100 switch series simplifies deployment, configuration and management by:- Offering a more flexible choice for your network by uniting products with the latest open standard protocols
- Utilizing one common command line interface (CLI) and graphic user interface (GUI) using a well-known command language
- Promoting greater interoperability through interfaces with Cisco's Rapid Per VLAN Spanning Tree (RPVST+) and devices using Cisco Discovery Protocol (CDP)
- Integrating with industry-leading management tools for a cohesive wired and wireless network
Designed for efficiency
Built to help keep operating costs down, the N1100 Series can operate at temperatures up to 113°F (45°C) to help reduce cooling costs. Improve your overall efficiency with these great features:
- Fanless operation in 8-, 24-, and 48-port models (N1108T-ON, N1124T-ON, and N1148T-ON)
- Variable speed fan control available on 48-port PoE model (N1148P-ON)
- Energy-efficient Ethernet and low-power PHYs to help reduce power to inactive ports and idle links
Deploy with confidence
With high throughput and capacity to handle unexpected workloads, the N1100 Series switches are ideal solutions for fast-growing GbE networks that require high-density aggregation with seamless redundancy and availability. Take advantage of the following features:
- Data rates up to 176Gbps (full duplex) and a forwarding rate of up to 164Mpps
- Four 10GbE SFP+ ports for high-speed uplinks and a stacking architecture up to four units at 40Gbps
- Switch stacks up to 196 1GbE ports that can be managed from a single screen or IP address
Dell EMC Networking N1108T-ON Switch
- 8x 10/100/1000Mbps half/full duplex RJ45 ports plus 2x GbE RJ45 and 2x GbE SFP interfaces
- Compact 1 RU half-width form factor
- Fanless operation
Dell EMC Networking N1108P-ON Switch
- 8x 10/100/1000Mbps half/full duplex RJ45 ports
- 2x GbE RJ45 and 2x GbE SFP interfaces
- 4x PoE/PoE+ RJ45 ports
- Compact 1 RU half-width form factor
Dell EMC Networking N1124T-ON Switch
- 24x 10/100/1000Mbps half/full duplex RJ45 ports
- 4x SFP/SFP+ 1/10GbE ports
- 1 RU switch form factor
- Fanless operation
Dell EMC Networking N1124P-ON Switch
- 24x 10/100/1000Mbps half/full duplex RJ45 ports
- 4x SFP/SFP+ 1/10GbE ports
- 12x PoE/PoE+ ports
- 1 RU switch form factor
Dell EMC Networking N1148T-ON Switch
- 48x 10/100/1000Mbps half/full duplex RJ45 ports
- 4x SFP/SFP+ 1/10GbE ports
- 1 RU switch form factor
- Fanless operation
Dell EMC Networking N1148P-ON Switch
- 48x 10/100/1000Mbps half/full duplex RJ45 ports
- 4x SFP/SFP+ 1/10GbE ports
- 24x PoE/PoE+ ports
- 1 RU switch form factor
Navigate network complexity with Dell EMC Services
Our global team of network experts understands the complexities of IT ecosystems, including multi-vendor environments. We have the skillset and experience to not only quickly resolve performance issues but also transform your network to meet the demands of your business.
Consulting
Dell EMC network consultants provide expert guidance to help you optimize and transform the network environment for the demands of today’s multi-cloud infrastructures. Our deep infrastructure and application expertise combined with sophisticated network analysis toolsets address a wide range of network technology and process challenges.
Deployment
Leverage the Dell EMC ProDeploy Enterprise Suite to get your network installed and configured. Our experts can free your IT staff to focus on your core business, minimize downtime and give you the confidence that the job will be done right, the first time.
Support
Gain access to ProSupport technical experts who can assist with your most complex networking challenges. The Dell EMC ProSupport Enterprise Suite provides networking support around the clock and around the globe, helping your team maintain a high level of productivity.
Education
Dell EMC offers flexible training programs so your staff can build the right skills to successfully manage and utilize your network to its full potential. Through our personalized approach, your staff gets the exact training they need to improve productivity and adoption, decrease downtime, and reduce end-user support calls.
