|

Dell Networking S-Series Managed Switches

 
Call Dell
1-800-999-3355

Designed for flexibility and performance

Accelerate the migration to higher performance with Dell Networking S-Series 1/10/40GbE switches.

 
 

 

Legend: S — Standard, N — Not Available
PerformanceS4810S4820TS5000S6000
MAC Address128,000128,000128,000160,000
IPv4 routes16,00016,00016,00016,000
IPv6 routes8K (shared CAM space with IPv4)8K (shared CAM space with IPv4)8K (shared CAM space with IPv4)8K (shared CAM space with IPv4)
Switching fabric capacity1.28 Tbps (full-duplex)
640 Gbps (half-duplex)
1.28 Tbps (full-duplex)
640 Gbps (half-duplex)
1.28 Tbps (full-duplex)
640 Gbps (half-duplex)
2.56 Tbps (full-duplex)
1.28 Tbps (half-duplex)
User traffic capacity960 Mpps960 Mpps960 Mpps1462 Mpps
Link aggregation8 links per group, 128 groups per stack8 links per group, 128 groups per stack8 links per group, 128 groups per stack8 links per group, 128 groups per stack
Stacking capacity160Gbps160Gbps160Gbps160Gbps
Queues per port4 queues4 queues4 queues8 queues
VLANs4,0004,0004,0004,000
Line-rate Layer 2 switching — All protocols, including IPv4 and IPv6SSSS
Line-rate Layer 3 routing — IPv4 and IPv6SSSS
LAG load balancing — Based on Layer 2, IPv4 or IPv6 headersSSSS
Switching latency800ns3.3us800ns600ns
Packet buffer memory9MB9MB9MB12MB
CPU memory2GB2GB2GB4GB
IPv4 host table size4,0008,0008,00048,000
IPv6 host table size4,0008,0008,00032,000
IPv4 Multicast table size4,0008,0008,00064,000
AvailabilityS4810S4820TS5000S6000
Ring stacking topology with dynamic master electionSSSN
Dual modular slots with up to four 10 GbE portsSSSN
Link aggregation across stack membersSSSS
Built-in power redundancySSSS
Hot swappable redundant AC or DC powerSSSS
Hot swappable redundant fansSSSS
ChassisS4810S4820TS5000S6000
Line-rate ports48 - 10 Gigabit Ethernet SFP+ ports48 - 10 GBASE-T ports48 - 10 Gigabit Ethernet SFP+ ports & FC/FCoE ports32 - 40 Gigabit Ethernet QSFP+ ports or up to 96 - 10 GbE SFP+ & 8 - 40GbE ports (breakout mode)
SFP Ports4 - 40 Gigabit Ethernet QSFP+ ports4 - 40 Gigabit Ethernet QSFP+ ports4 - 40 Gigabit Ethernet QSFP+ ports32 - 40 Gigabit Ethernet QSFP+ ports
1 RJ45 console/management port with RS232 signalingSSSS
1 RJ45 Ethernet management portNNNS
USB PortsNNSS
2 line-rate ports 10 Gigabit Ethernet XFP ModulesNNNN
2 line-rate ports 10 Gigabit Ethernet CX4 ModulesNNNN
2 line-rate ports 12 Gigabit Stacking ModulesNNNN
2 line-rate ports 10 Gigabit Ethernet SFP+ ModulesNNNN
1 line-rate port 24 Gigabit Stacking ModulesNNNN
Dimensions S4810S4820TS5000S6000
Size1 RU, 1.73 h x 17.32 w x 18.11" d (4.4 h x 44 w x 46 cm d)1 RU, 1.71 h x 17.09 w x 18.11" d (4.35 h x 43.4 w x 46 cm d)1RU, 1.73 h x 17.32 w x 28" d (4.4 h x 44 w x 46 cm d)RU, 1.73 h x 17.32 w x 18.11" d (4.39 h x 43.99 w x 46 cm d)
Weight14.39 lbs (6.54 kg)21.7 lbs (9.86 kg)34 lb (15.42 kg)14.41 lbs (6.54 kg)
ISO 7779 A-weighted sound pressure level59.6 dBA at 73.4°F (23°C)65 dBA at 78.8°F (26°C)59.6 dBA at 73.4°F (23°C)20 dBA at 73.4°F (23°C)
Environmental S4810S4820TS5000S6000
Operating temperature:
32° to 122°F (0° to 50°C)
32° to 104°F (0° to 40°C)32° to 113°F (0° to 45°C)32° to 104°F (0° to 40°C)32° to 113°F (0° to 45°C)
Operating humidity:
10 to 85% (RH), noncondensing
10 to 85% (RH), noncondensing10 to 90% (RH), noncondensing10 to 85% (RH), noncondensing10 to 90% (RH), noncondensing
Storage temperature:
–40° to 158°F (–40° to 70°C)
SSSS
Storage humidity:
5 to 95% (RH), noncondensing
SSSS
PowerS4810S4820TS5000S6000
Power supply100–240 VAC 50/60 Hz100–240 VAC 50/60 Hz100–240 VAC 50/60 Hz
-48 to -60 VDC
100–240 VAC 50/60 Hz
Max. thermal output:955.36 BTU/h1433 BTU/h1878 BTU/h1265.9 BTU/h
Max. current draw per system2 A at 100/120 VAC, 1 A at 200/240 VAC4.2A at 100/120VAC, 2.1A at 200/240VAC, 1.04A at 40.5VDC, 7A at 60VDC 7A at 100/120VAC, 3.5A at 200/240VAC, 15.2A at -46VDC, 11.7A at -60VDC 3.8A at 100/120 VAC, 1.6A at 200/240 VAC
Max. power consumption350 Watts460 Watts550 Watts371 Watts
Max. PoE powerNNNN
ReliabilityNNNN
SafetyS4810S4820TS5000S6000
EN 60825-1 Safety of Laser Products Part 1: EquipmentSSSS
EN 60825-2 Safety of Laser Products Part 2: Safety ofSSSS
EN 60950-1, Second EditionSSSS
Equipment Classification Requirements and User's GuideSSSS
FDA Regulation 21 CFR 1040.10 and 1040.11SSSS
IEC 60950-1, Second Edition Including all NationalSSSS
Optical Fibre Communication SystemsSSSS
UL/CSA 60950-1, Second EditionSSSS
Emissions S4810S4820TS5000S6000
Australia/New Zealand: AS/NZS CISPR 22: 2009, Class ASSSS
Canada: ICES-003, Issue-4, Class ASSSS
Europe: EN 55022: 2006+A1:2007 (CISPR 22: 2006), Class ASSSS
Japan: VCCI V3/2009 Class ASSSS
USA: FCC CFR 47 Part 15, Subpart B:2009, Class ASSSS
Immunity S4810S4820TS5000S6000
EN 300 386 V1.4.1: 2008 EMC for Network EquipmentSSSS
EN 55024: 1998 + A1: 2001 + A2: 2003SSSS
EN 61000-3-2: Harmonic Current EmissionsSSSS
EN 61000-3-3:Voltage Fluctuations and FlickerSSSS
EN 61000-4-2: ESDSSSS
EN 61000-4-3: Radiated ImmunitySSSS
EN 61000-4-4: EFTSSSS
EN 61000-4-5: SurgeSSSS
EN 61000-4-6: Low Frequency Conducted ImmunitySSSS
RoHS S4810S4820TS5000S6000
All S Series components are EU RoHS compliant.SSSS

Regulatory information:
Product Safety, EMC and Environmental Datasheets (in English)
Dell Regulatory Compliance Home Page (in English)
Dell and the Environment (in English)
Enterprise Service

Global Services and Support

Dell offers a wide range of professional services to simplify the assessment, design, implementation, management and maintenance of your IT environment to help you transition from platform to platform.

Dell Enterprise Deployment Services
Dell’s end-to-end deployment services ensure your Dell Server installation, configuration and implementation is completed accurately and quickly—anytime, anywhere—with proven processes based on best practices acquired from thousands of deployments by our highly skilled experts.

Dell Support Services
Dell ProSupport offers a suite of support services that enable you to choose support models based on how you use technology and where you want to allocate resources. We recommend Dell ProSupport Plus with SupportAssist for mission-critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. For hyper-scale data centers, we also offer ProSupport Flex for Data Center.
Dell Training Services
Dell Education Services aims to complement your relationship with Dell as a trusted partner by offering Education Services for our own products, for industry leading infrastructure solutions and for the ongoing development of your organization. It is a global organization with local representation, classrooms and web-based training available worldwide.

Contact your Dell representative today for more information or click here.

Designed for performance

Dell Networking switching technology enables outstanding productivity for virtualized data center and cloud computing environments. The wide range of S-Series switches includes the S6000 10/40G high-density top-of-rack (ToR) switch, a compact 1RU fixed switch with full L2/L3 capability, including Data Center Bridging (DCB) and Virtual Link Trunking (VLT).
Designed for performance

  • Added flexibility to configure 32 x 40GbE ports or 96 x 10GbE plus 8 x 40GbE ports
  • Low latency with superb performance and high density with hardware and software redundancy
  • DCB for reliable, high-performance Ethernet in large data center networks
  • Streamlined connectivity and workflow operation across physical and virtual resources with multi-tenancy capabilities
  • Support for Network Virtualization with VXLAN Gateway hardware support integrated into the switch
  • Integrated automation, scripting and programmatic management for enhanced network flexibility in virtualized environments
Developed for flexibility

Developed for flexibility

The Dell Networking S-Series switches offer a family of products that enable you to find the ideal solution for your specific needs.
  • Deliver versatility with line-rate performance and port densities from 48 x 1/10Gb Base T line-rate ports in the S4820T switches to 32 x 40GbE ports in the S6000
  • Scale quickly with efficient stacking offered in many of the S-Series models, including S4810/S4820T/S5000 (10/40Gb) platforms
  • Powered by our industry-hardened and feature-rich operating system for maximum dependability and uptime
  • Full support for iSCSI storage area networks including support for DCB

Built for cost-effective deployment

Select S-Series Managed 10/40 Gb switches are supported with the Dell Open Automation Framework, a suite of interrelated network management tools that can be used together or independently to provide a flexible, available and manageable network while helping reduce operational expenses.

The Open Automation Framework takes full advantage of Dell FTOS software capabilities to bring network automation into virtual data center environments. This helps the S-Series switches efficiently respond and adapt to changes in application requirements.
Built for cost-effective deployment

Networking Services and Support

force 10 s series
Network Topology Assessment
Is your network complex and coiled? Dell can perform a detailed network evaluation to expose design flaws and give you advice on how to architect the future. Detailed report includes insight into connected devices, multi-device relationships, topologies of the network, and potential security threats. Contact Dell for more information.
force 10 s series
Network Performance Assessment
Network running slow? Let Dell conduct an in-depth analysis to uncover network latency and performance issues of specific servers and applications. Detailed report and remediation plan provided at end of analysis. Contact Dell for more information.
force 10 s series
Deployment Services
Setting up network protocols, and policies can be tricky. Dell certified network professionals can configure and optimize your new hardware remotely or onsite. Dell can also interconnect existing network infrastructure from Cisco, HP, Juniper, and others. Let Dell seamlessly weave it all together. Add deployment services to your hardware purchase.
force 10 s series
Remote Consulting
Are there times when you need a little extra technical guidance? Certified experts are available to discuss networking design or help you resolve issues pertaining to the wired or wireless network. Call Dell to speak with certified network consulting experts.
Dell ProSupport
Dell ProSupport
Choose Dell’s premium support service, Dell ProSupport*, for 24/7 direct telephone and online access to advanced-level technicians based in your region. Whether you have one office or hundreds around the world, protect your investments with this simple yet flexible approach.
Dell Networking S6000 10/40GbE ToR Switch
The S6000 supports top-of-rack (ToR), middle-of-row (MoR) and end-of-row (EOR) connectivity to 10GbE servers and 40GbE fabrics for enterprise and midmarket implementations. The 1U S6000 enables streamlined connectivity and workflow operation with low latency operation and includes support for Network Virtualization with VXLAN Gateway hardware built-in. Virtual Link Trunking (VLT) helps eliminate spanning tree protocol (STP)-blocked ports and provides fast convergence if a link or device fails

Dell Networking S6000 10/40GbE ToR Switch

Dell Networking S5000 10/40G Unified Storage Switch
The S5000 enables converging LAN and SAN traffic in a single 1U top-of-rack switch. It features a unique modular design to enable adding Ethernet and Fibre Channel/FcoE modules when needed, and DCB support for lossless Ethernet. In addition, the S5000 helps standardize and simplify the Dell Active System Infrastructure pre-integrated systems.
Dell Networking S5000 10/40G Unified Storage Switch

Dell Networking S4820T 10G Base T Switch
Deploy 1/10GbE for 10G copper terminations to server with the S4820T 10G Base T switch. The high-density switch features 48 ports of 1/10GbE and four 40GbE uplinks in a 1U rack chassis. Powered by the Dell Networking Operating System (FTOS), it offers non-blocking, line-rate performance for top-of-rack storage solutions and Dell 12G rack servers as well as 12G blade servers with Dell Networking MXL switches.
Dell Networking S4820T 10G Base T Switch


Dell Networking S4810 High-Performance 10/40GbE Switch
Deliver low-latency throughput with the S4810. The 1/10/40GbE top-of-rack, aggregation or core switch features a 1.28 Tbps (full-duplex), non-blocking, cut-through switching fabric designed to deliver line-rate performance under full load with 800ns latency.
Dell Networking S4810 High-Performance 10/40GbE Switch


Dell Networking S60 High-Performance 1/10GbE Switch
Optimized to improve manageability at the network edge, the S60 is a stackable, 48-port GbE top-of-rack switch that delivers non-blocking, line-rate switching and routing with a 1.25GB deep-packet buffer to help eliminate congestion.
Dell Networking S60 High-Performance 1/10GbE Switch

Dell Networking S55 High-Performance 1/10GbE Switch
Designed for high-performance data center applications, the S55 features a 176 Gbps switch fabric that supports line-rate, non-blocking switching with less than five microseconds of latency.
Dell Networking S55 High-Performance 1/10GbE Switch

Dell Networking S25V/S50V Power-over-Ethernet Switches
The scalable, stacking technologies of the S25V/S50V PoE switches bring core-like resiliency to the network edge, supporting up to 384 GbE ports with up to eight S50Vs.
Dell Networking S25V/S50V Power-over-Ethernet Switches

Dell Networking S25P Fiber Switch
Delivering high-GbE fiber density at the network edge, the S25P switch enables cost-effective scalability while helping eliminate bandwidth bottlenecks at key aggregation points.
Dell Networking S25P Fiber Switch

Dell Networking S25N/S50N Edge Switches
The S25N and S50N are high-performance and low-latency 1/10GbE fixed configuration switches designed principally for data center top-or-rack systems and access applications.
Dell Networking S25N/S50N Edge Switches
S4820T Switch - ITPro Innovation Award

The S4820T earns 5/5 stars.

“Crams features into its 1U chassis.” — ITPro
Read Review
S5000 - CRN - 2013 Tech Innovator Award
close
 
 
CS02