Superior capacity in a 2U form factor
The Dell™ PowerVault™ 114X rackable subsystem is a convenient 2U tape rack enclosure designed to complement Dell PowerEdge™ rack servers and Dell PowerVault network attached storage (NAS).
The PowerVault 114X supports a maximum of 2 LTO tape drives or a maximum of 4 RD1000 drives. The 114X can be configured to mix and match LTO and RD1000 drives.
Supports LTO-4, LTO-5 and LTO-6 (6 Gbps SAS).
Highlights
LTO-5-140 (114X), LTO-4-120 (114X), LTO-3 (Full-Performance) (114T), LTO-3-060 (114X), or LTO-2-L (114T) Tape Rack Enclosure- Is ideal for customers who require multidrive, rack-optimized data protection that can be externally connected to a server
- Is configurable with up to two tape drives in a space saving, 2U form factor that still enables you to connect drives externally to a server
- Provides a choice of drive technology from the most inexpensive drives with essential capacity to the highest performance drives Dell offers in automation platforms
- Contains two SCSI or serial attached SCSI (SAS) (LTO-3-060 or LTO-4-120) ports that enable two tape drives to operate in parallel, helping to reduce overall backup time
Software
Media Types
- LTO-4, LTO-5,LTO-6 and RD1000
Storage
Server Compatibility
- Dell and x86 IBM and x86 HP Servers
Support for NX4 and other NDMP products
Please refer to compatibility matrix for complete listing
Chassis
- PowerVault 114X
Form Factor: 2U Rack Mount
Height: 86.9 mm (3.42 inch)
Width: 482.5 mm (19.00 inch)
Depth: 480.7 mm (18.93 inch) including bezel
Weight: 8.3 Kg (18.4 lbs)
Tool-less
LED for fan status
Power on/off switch
Power
- Power Requirements: 100-127 VAC
Power Consumption: Up to 85w with two drives running
Environmental Operating Conditions
- Operating Temperature: 50 to 104 degrees F 10 to 40 degrees C
Non-Operating Temperature: Drive dependent
Operating Humidity: 20% to 80%
Non-Operating Humidity: Drive dependent





