Build up your capacity with powerfully simple storage
Enhance storage capacity and performance for your mid-tier iSCSI SAN with high-capacity EqualLogic™ PS6100E next generation GbE iSCSI SAN arrays.
- Maximum capacity: Deploy up to 72TB in a single 4U chassis.
- Optimized scalability: Take advantage of highly virtualized peer storage for linear performance and capacity scalability.
- Management flexibility: Manage both file and block storage protocols through one console with EqualLogic Group Manager.
Gallery
Video
Built to make storage simple
Master your data-hungry tasks with EqualLogic PS6100E—high-capacity performance with easy, flexible management for highly consolidated mid-tier storage environments.
Designed to scale with your business
Fulfill your high-capacity needs with the PS6100E GbE internet SCSI (iSCSI) array, a Dell™ Fluid Data™ solution with a virtualized scale-out architecture that delivers enhanced storage performance and reliability that is easy to manage.
- Help eliminate downtime and performance penalties with smooth, incremental SAN expansion.
- Grow your virtual storage alongside your virtual server growth.
- Change hardware without disruption.
- Add or remove arrays at will, according to policy, age, application or business needs.
- Easily mix new disk or network technologies in the SAN.
- Move volumes (databases/VMs) online between any pool or disk resources.
- Avoid forklift upgrades or data-in-place migrations that cost time and money.
- Automatically balance loads across disks and multiple arrays in a pool.
- Help eliminate manual redistributing of capacity or application workloads (downtime and services costs).
Choose your array
Build capacity for your data center using PS6100E arrays. With 24 NL-SAS 3.5" HDDs and up to 72 terabytes of capacity in a 4U chassis, the PS6100E combines maximized capacity and optimized scalability with simple, flexible management.
The PS6100 Series family features:
- Dual controllers designed for built-in redundancy
- Four GbE ports per controller
- Dedicated 10/100 management port per controller
- 6G SAS backplane
- Options for 12 or 24 hot-swappable drives
- 3.5" 7,200 rpm NL-SAS drives available in 1TB, 2TB, or 3TB
- Cache-to-flash memory de-staging
- Peer-scaling architecture that scales performance linearly
- Vertical Port Failover, designed to enable you to maintain full bandwidth if a networking port fails
- Group Manager, which integrates all management into one console for both file- and block-storage protocols
- Array firmware and host software with no additional licenses or fees
- Enhanced security with self-encrypting drives (SED)
Grow confidently with advanced Array Software features
Meet your current storage needs and future data management requirements with EqualLogic™ Array Software.- Synchronous Replication: Maintain two identical copies of a volume across two different storage pools in the same PS Series for real-time data protection.
- Volume Unmap: Recover unused space previously allocated to thin-provisioned volumes for better storage capacity utilization and cost-effectiveness.
- Snapshot Space Borrowing: Temporarily increase the available snapshot space for a volume by borrowing from the snapshot reserve of other volumes and pool-free space, improving your capacity management.
Product Configurations
- Storage Controllers
Dual controllers, each with 4GB memory for PS-series firmware. Each controller provides cache to flash for data protection.
Hard Disk Drives
Twenty-four (24) NL-SAS hot-pluggable hard disk drives (Twelve (12) drive configuration available. Please contact your Dell Sales Representative for details).
Drive Capacities
3.5" 7,200 RPM NL-SAS drives available in 1 TB, 2TB, or 3 TB
System Capacities
24 TB* using twenty-four (24) 1 TB* NL-SAS disk drives
48 TB* using twenty-four (24) 2 TB* NL-SAS disk drives
72 TB* using twenty-four (24) 3 TB* NL-SAS or NL-SAS SED disk drives
Technical Highlights
- Volumes
Up to 1,024
Snapshots
512 per volume / up to 10,000 total per group
Volume Connections
Up to 1,024
Host Protocol
Any standards-compliant iSCSI initiator
Operating Systems Supported
Windows® 2000 Server, Windows Server® 2003, Windows Server® 2008, including Hyper-V™, Windows Vista®, Windows Server® 2008 R2 including Hyper-V™, Windows XP®, Red Hat® Enterprise Linux®, SUSE® Linux® Enterprise, Sun™ Solaris™, IBM® AIX®, HP-UX, Mac OS® X, VMware® ESX Server 3 / 3.5 / 4 / 4.1 / 5, ESXi 3.5 / 4 / 4.1 / 5, Citrix® XenServer™, Novell® NetWare®
RAID Support
RAID 5, RAID 6, RAID 10, and RAID 50
Network Interfaces
Four (4) copper per controller + One (1) dedicated management port
TCP Network Support
IPv4, IPv6 core support
Expansion Option
Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. Up to 16 total members per group
Reliability
- Vertical port sharing
Redundant, hot-swappable controllers; power supplies / cooling fans, and hot-swappable disks
Individual disk drive slot power control
Cache-to-flash
Enclosure Monitoring System
- Automatic spare configuration and utilization
SMART
Automatic bad block replacement
Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drives
Management
- SAN Headquarters multi-group performance and event monitoring tool
Serial console
Ability to configure a separate management network
SNMP, telnet, SSH, HTTP, Web (SSL), host scripting
Multi-administrator support
Security
- CHAP authentication
Access control for iSCSI
Access control for management interfaces including Active Directory, LDAP, or RADIUS support
Notification Methods
- SNMP traps, e-mail, syslog
Power
- AC voltage: 100-240 VAC ±10% single phase 1080W (max, total), +5V up to 155W; +12V up to 924W;+5Vsb up to 10W
Frequency: 50/60 Hz
Power factor: 0.98 (minimum)
Power supplies: Dual 1080 W
Chassis
- Height: 4U / 17.5 cm (6.89 inches)
Width: 44.63 cm (17.57 inches)
Depth: 57.5 cm (22.6 inches)
Weight: 44.45 kg (98 lbs)
Packaged physical: Length: 905 cm (35.63 inches) Width: 616 cm (24.25 inches) Depth: 508 cm (20 inches)
Packaged weight: 53.5238 kg (118lbs)
Rack Support
Dell ReadyRails™ sliding rails for square-hole 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to snap into place with screws or other hardware
Dell VersaRails sliding rails for 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to be mounted in racks whose posts have round holes
Environmental Operating Conditions
- Temperature range: 5° to 40°C (41° to 104°F)
Storage temperature: –40° to 65°C (–40° to 149°F)
Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft.
Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation
of 10% per hour
Operational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only
Operating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations
Acoustics Category 4: <=7.2 bels at 23C +/- 2C
Air Quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985
Regulatory
- Regulatory Model: E05J
Regulatory Type: E05J001
Product Safety, EMC and Environmental Datasheets
Dell Regulatory Compliance Home Page
Dell and the Environment
Dell delivers comprehensive end-to-end solutions to help you store and manage your data so you can efficiently move the right data to the right place at the right time for the right cost. EqualLogic™ array software and host software are part of these solutions and are included with your EqualLogic array purchase — providing all the tools your organization needs for a complete storage area network (SAN) solution.
Learn More
Learn More
 |  | EqualLogic Array Software Each EqualLogic array ships with a powerful set of features that help you manage, protect and optimize your data. The EqualLogic Group Manager helps streamline storage and data management while the EqualLogic Manual Transfer Utility helps minimize downtime when transferring large amounts of data. EqualLogic PS Series Firmware is the foundation of the EqualLogic software family. Integrated across the entire family of EqualLogic PS arrays, the EqualLogic Firmware is a SAN operating system based on a unique peer storage architecture that:
Learn More |
 | EqualLogic Host Integration Tools This family of host-based software provides tight integration between the EqualLogic array and the host. Dell provides host integration tools for Microsoft®, VMware® and Linux® environments, providing customers with the following benefits:
Learn More |
 | EqualLogic SAN Headquarters Dell EqualLogic SAN Headquarters (SAN HQ) is a centralized monitoring and reporting tool that gathers and provides in-depth information on performance, capacity and alerts across multiple groups of EqualLogic PS arrays, helping improve performance and effective allocation of group resources. Learn More |
Dell ProSupport
With faster, more reliable support services designed to address the technology challenges you face today, the Dell™ ProSupport™* portfolio is focused on your needs, time demands and budgets.
- Need professional support services that take care of both you and your employees’ IT needs 7x24? Choose Dell ProSupport to get access to a certified technician in two minutes or less.
- Got an IT staff? Choose Dell ProSupport for IT and get tech-to-tech support along with 7x24 access to Dell-certified technicians.
Service models
Dell ProSupport
Designed for organizations with limited or no dedicated IT staff. Includes:
- 7x24 direct break-fix hardware and software support for your employees
- Access to a certified technician in two minutes or less
Dell ProSupport for IT
Designed to provide tech-to-tech support for IT Professionals, database administrators, and internal service desks or helpdesks. Includes:
- 7x24 direct access to Dell Expert Centers
- Escalation management through Dell’s Global Command Centers
- Collaborative hardware and software support
Additional Dell ProSupport options align to the way you use technology — rapidly responding to your needs, protecting your investment, your productivity and your sensitive data, and providing enhanced proactive support services to reduce the risk and complexity of managing your infrastructure.
| Speed of response | Protection | Premium proactive |
| Mission Critical* — Perfect for server and storage environments where avoiding unplanned downtime and reducing recovery time through priority response are a must. This package includes priority 4-hour on-site service or optional 2-hour response with 6-hour hardware repair, Dell’s proven Critical Situation process and emergency dispatch. | Data management and protection — Helps ensure data security
| Enterprise-wide contract — Provides enhanced proactive capabilities through:
|
Customization and setup services |
Dell server and storage deployment services Dell provides a comprehensive set of remote and on-site installation services for PowerEdge™ servers as well as PowerVault™, Dell | EMC™ and EqualLogic™ storage products to help reduce the time required to get your system up and running. These installation services help:
Learn More |
Training |
Comprehensive training Get the skills you need to keep pace in today's competitive IT environment with comprehensive training courses. Dell offers a vast array of instructor-led classes and online training courses in a range of topics from server maintenance to in-depth technical overview of specific systems. Learn More |
