Page 2679 UEFI0004 Detailed Description A CPU invalid opcode exception (type 0x06) occurred in the pre-boot UEFI environment. The software attempted to execute invalid code.
Recommended Response Action Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
ayas
Moderator
Moderator
•
6.6K メッセージ
0
2023年6月25日 17:00
lllllllllllllllllllllllさん
エラー内容を調べてみるとUEFI0004は直近でアップデート、もしくは追加したハードウェア、もしくはソフトウェアがBoot時に悪さをしているときに出るエラーのようです。そのためそのようなハードウェア、ソフトウェアがないかどうか確認し、必要であれば前の状態に戻す(正常に起動していた時の状態)必要があるのかもしれません。
判断に迷ったり、そういった変更に心当たりがなかった場合はサポートへのご相談をお勧めします。
参考:Event and Error Message Reference Guide for 14th Generation Dell EMC PowerEdge Servers Version 1.90
Page 2679
UEFI0004
Detailed Description
A CPU invalid opcode exception (type 0x06) occurred in the pre-boot UEFI environment. The software attempted to execute invalid code.
Recommended Response Action
Recently installed hardware or updated software may cause this exception. Update or remove the hardware or software.
lllllllllllllllllllllll
3 メッセージ
0
2023年7月13日 21:00
追加取り付けたハードウェアを取り外してiDRACをリセットしたら起動しました。
ありがとうございました。