PowerVault MD1200

PowerVault MD1200

Dell PowerVault MD1200
+ Closer Look at PowerVault MD1200

Versatile, High-Capacity Direct-Attached Storage Array

DellTM  PowerVaultTM  MD1200 direct-attached storage array offers versatility and high-capacity storage for mainstream applications, with optimal performance in sequential (streaming) applications.

  • Seamless server expansion for 6Gb/s SAS environments
  • Supports mainstream and capacity-intensive applications such as e-mail, backup to disk and video streaming
  • Deployment and drive versatility good for investment protection and data tiering




+ More Images of PowerVault MD1200

 Choose PowerVault MD1200

  PERC RAID Controllers
PERC H800 supports RAID levels 0, 1, 5, 6, 10, 50 and 60
See PERC H800 server compatability matrix for a list of currently supported servers.

  Drives and Capacity
Up to twelve (12) hot-pluggable SAS Hard Disk Drives (HDDs) at 7200, 10K and 15K rpm and SAS Solid State Drives (SSDs)

3.5" SAS HDDs
15,000 RPM 6Gb/s SAS drives available in 300GB* , 450GB and 600GB
7,200 RPM (Nearline) 6Gb/s SAS drives available in 500GB* , 1TB* , and 2TB*

2.5" SAS HDDs and SSDs in 3.5" Carriers
10,000 RPM 6 Gbps SAS HDDs available in 300 GB, 600 GB
3 Gbps Solid state drives available in 149 GB

Maximum Capacity (per enclosure)
24TB using twelve 2TB* 7,200 RPM 6Gb/s SAS disk drives

Expansion Capabilities

Support for the following configurations:
Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H800 (4 enclosures per port, single path)
Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERC H800 (4 enclosures connected to both ports via redundant path cabling)
Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 though 5 and a separate connectivity to drives 6 through 11.

  Enclosure Management Modules (EMM)
2 EMM modules provide redundant enclosure management capability

  Back-Panel Connectors
SAS connectors (per EMM)
1 SAS (SFF 8088) "IN" connector for connection to the host
1 SAS (SFF 8088) "OUT" connector for expansion to an additional enclosure

Serial connector (per EMM)
1 6-pin UART mini-DIN connector (for factory use only)

  LED Indicators
Front panel
1 two-color LED indicator for system status
2 single-color LED indicators for power and split mode

Drive carrier
1 single-color activity LED
1 two-color LED status indicator per drive

3 two-color LED status indicators: one each for the two EMM SAS ports and one for the EMM status
1 single-color Unit Identification LED for each EMM

Power supply/cooling fan module
3 LED status indicators for power supply status, power supply/fan fault and AC status

  Power Supplies (per PSU)
Two fully redundant power supplies

600 W

Heat dissipation
188 W

100-240 VAC, auto sensing

50/60 Hz

8.6 A at 100 V, 4.3 A at 240 V

  Available Drive Power (per slot)
Supported drive power consumption (continuous):
up to 1.16 A at +5V
up to 1.6 A +12V

8.7 cm (3.43 inches)

48.2 cm (18.98 inches)

59.4 cm (23.39 inches)

28.39 kg (62.6 lb) (maximum configuration)
8.84 kg (19.5 lb) (empty)

Operating: 10° to 35°C (50° to 95°F) with maximum temp gradation of 10°C per hour
Storage: -40° to 65°C (-40° to 149°F) with temp gradation of 20°C per hour

Relative humidity
Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hour
Storage: 5% to 95% (non-condensing)

Operating: -16 to 3048 m (-50 to 10,000 ft)
Storage: -16 to 10,600 m (-50 to 35,000 ft)

BTU per hour

  Supported Operating Systems
Refer to RAID Card for details on supported Operating Systems:
  Regulatory and Environmental Compliance