|

PowerVault MD1220

PowerVault MD1220

PowerVault MD1220
+ Closer Look at PowerVault MD1220



High-Performance, Energy-Efficient Direct Attached Storage Array


Energy-efficient storage-expansion array that provides the performance to satisfy demanding single- server applications.
  • Seamless server expansion for 6Gb/s SAS environments
  • Supports performance-intensive applications such as Web server, database and e-mail.
  • 2.5-inch small-form-factor (SFF) array

Gallery
Gallery

360°
360°

Features
Features

+ More Images of PowerVault MD1220


 Choose PowerVault MD1220

  PERC RAID Controllers
PERC H800 supports RAID levels 0, 1, 5, 6, 10, 50 and 60.
See PERC H800 server compatability matrix for a list of currently supported servers.

  Drives and Capacity
Drives
Up to twenty four (24) 2.5-inch hot-pluggable SAS Hard Disk Drives (HDDs) at 7200, 10K, 15K rpm and SAS Solid State Drives (SSDs).

2.5" SAS HDDs
15,000 RPM 6Gb/s SAS drives available in 73GB* and 146GB*
10,000 RPM 6Gb/s SAS drives available in 146GB* , 300GB* and 600GB*
7,200 RPM (Nearline) 6Gb/s SAS drives available in 500GB*

2.5" SAS SSDs
3Gb/s Solid State Drives available in 149GB

Maximum Capacity (per enclosure)
14.4TB* using twenty four (24) 600GB* 10K RPM 6Gb/s SAS HDDs

Expansion Capabilities
PERC H800 enables expansion to 8 enclosures, 4 per port

  Connectivity
Support for the following configurations:
Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H800 (4 enclosures per port, single path)
Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERC H800 (4 enclosures connected to both ports via redundant path cabling)
Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 though 11 and a separate connectivity to drives 12 through 23.

  Enclosure Management Modules (EMM)
EMMs
2 EMM modules provide redundant enclosure management capability

  Back-Panel Connectors
SAS connectors (per EMM)
1 SAS (SFF 8088) "IN" connector for connection to the host
1 SAS (SFF 8088) "OUT" connector for expansion to an additional enclosure

Serial connector (per EMM)
1 6-pin UART mini-DIN connector (for factory use only)

  LED Indicators
Front panel
1 two-color LED indicator for system status
2 single-color LED indicators for power and split mode

Hard-drive carrier
1 single-color activity LED
1 two-color LED status indicator per drive

EMM
3 two-color LED status indicators: one for each of the EMM SAS ports and one for the EMM status
1 single-color Unit Identification LED for each EMM

Power supply/cooling fan module
3 LED status indicators for Power supply/cooling fan fault, AC power, and DC power

  Power Supplies
Two fully redundant power supplies

Wattage
600W

Heat dissipation
188W

Voltage
100-240VAC

Frequency
50/60Hz

Amperage
8.6 A at 100 V, 4.3 A at 240 V

  Available Hard Drive Power (per slot)
Supported drive power consumption (continuous):
up to 1.2 A at +5V
up to 0.5 A +12V

  Physical
Height
8.7 cm (3.43 inches)

Width
48.2 cm (18.98 inches)

Depth
54.1 cm (21.3 inches)

Weight
23.31 kg (51 lb) (maximum configuration)
8.61 kg (19 lb) (empty)

  Environmental
Temperature:
Operating: 10° to 35°C (50° to 95°F) with maximum temp gradation of 10°C per hour
Storage: -40° to 65°C (-40° to 149°F) with temp gradation of 20°C per hour

Relative humidity
Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hour
Storage: 5% to 95% (non-condensing)

Altitude
Operating: -16 to 3048 m (-50 to 10,000 ft)
Storage: -16 to 10,600 m (-50 to 35,000 ft)

BTU per hour
1147

  Supported Operating Systems
Refer to the PERC RAID Card details for supported Operating Systems
  Regulatory and Environmental Compliance

Resources

snWW15