|

Dell W-Series access points

intel® core™ processors
We're here to help. Contact a Dell expert ›

WiFi APs for virtually any venue

Deploy cost-effective, high-performance, context-aware WiFi networks for indoor and outdoor environments.

 

 

Dell W-Series Access Points — W-AP224/225W-Series AP224/225 802.11ac Access Points
W-Series AP224 (external antenna) and W-Series AP225 (internal antenna) are 802.11ac access points, supporting the new 5GHz industry standard for gigabit wireless data rates. These purpose-built 3x3 MIMO 802.11ac access points are designed to deliver blazing fast performance that is up to three times higher than comparable 802.11n access points. Dual-radio configurations enable flexible deployments:
• 5GHz: 3x3 MIMO for 802.11ac, delivering data rates up to 1.3Gbps
• 2.4GHz: 3x3 MIMO for 802.11n, delivering data rates up to 450Mbps

The AP224 and AP225 each include dual GbE ports to access wired backbones and are powered by Power-over-Ethernet 802.3at (PoE+) or an optional adapter.
W-Series AP274/275 802.11ac Outdoor Access PointsW-Series AP274/275 802.11ac Outdoor Access Points
W-Series AP274/275 access points are innovative and aesthetic designs that deliver Gigabit WiFi performance to 802.11ac mobile devices. These purpose-built access points are designed to survive harsh outdoor environments, including extreme high and low temperatures as well as persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants. With a maximum data rate of 1.3Gbps in the 5-GHz band and 600Mbps in the 2.4-GHz band, the AP274/275 outdoor APs support concurrent dual-radio operation.
Dell W-Series Instant Access Points — W-AP155/155PW-Series AP155/155P Wired + Wireless Access Points
Dual-band, dual-radio APs offering wire-like data rates of up to 450Mbps per radio. The AP155 and AP155P each have four ports available to the wired network and a USB port to connect to 3G and 4G networks. The W-Series AP155P has two Power-over-Ethernet (PoE)-capable LAN ports that can be used to power an external PoE-enabled device, such as an IP phone.
• Dual-radio, concurrent dual-band access points
• 2x2 MIMO with two spatial streams and up to 300Mbps wireless data rate in 2.4GHz
• 3x3 MIMO with three spatial streams and up to 450Mbps wireless data rate in 5GHz
Dell W-Series Access Points — W-AP134/135 W-Series AP134/135 Access Points
Enterprise-grade W-Series AP134 (external antenna) and AP135 (internal antenna) are the highest-performing W-Series 802.11n dual-radio indoor access points, designed to deliver data rates of up to 450Mbps per radio, up to 900Mbps total for denser environments.
Dell W-Series Access Points — W-AP114/115W-Series AP114/115 Access Points
W-Series AP114 (external antenna) and AP115 (internal antennas) are high-performance, dual-radio 802.11n access points designed to deliver data rates up to 450Mbps per radio, suited for medium density deployments.
 Dell W-Series Access Points — W-AP104/105W-Series AP104/105 Access Points
W-Series AP104 (external antenna) and W-Series AP105 (internal antenna) are enterprise-grade dual-radio 802.11n indoor access points designed to deliver data rates of up to 300Mbps per radio, up to 600Mbps total for medium density deployments.
W-Series AP103 802.11n Access PointsW-Series AP103 Access Points
W-Series AP103 access points provide cost-effective dual-band coverage in medium-density enterprise WiFi environments while minimizing interference from cellular networks. These compact APs deliver wireless data rates up to 300Mbps per radio employing 802.11n technology with two spatial MIMO streams. The AP103 features a 2.4-GHz and a 5-GHz radio, each with 2x2:2 MIMO and two integrated omnidirectional down-tilt antennas per radio.
 Dell W-Series Access Points — W-AP175W-Series AP175 Outdoor Access Points
Enterprise-grade family of mainstream dual-radio 802.11n outdoor access points designed to deliver data rates of up to 300Mbps per radio, up to 600Mbps total. Ideal for campuses, industrial parks and other harsh, outdoor open-air environments, W-Series AP175 access points can be powered via PoE, AC or DC power sources and include convenient wall and mast mounting options as well as a solar shield.
 Dell W-Series Access Points — W-AP92/93W-Series AP92/93 Access Points
W-Series AP92 (external antenna) and W-Series AP93 (internal antenna) are entry-level, enterprise-grade, single-radio 802.11n indoor access points designed to deliver data rates of up to 300Mbps.
 Dell W-Series Access Points — W-AP93HW-Series AP93H Wired + Wireless Access Point
A special-purpose 802.11n indoor access point with built-in 4-port fast Ethernet switch designed to deliver wireless data rates of up to 300Mbps. W-Series AP93H is specifically designed to be mounted over a network wall socket. Mounting kits sold separately.
 Dell W-Series Access Points — W-AP68W-Series AP68 Access Point
Designed to deliver data rates of up to 150Mbps for organizations that are looking for a basic enterprise-grade 802.11n access point.

Models

W‑AP224 and W‑AP225

W-AP274 and W-AP275

W‑AP134 and W‑AP135

W‑AP114 and W‑AP115

Data rate1.3 Gbps
3x3 MIMO
802.11ac
1.3 Gbps
3x3 MIMO
802.11ac
900Mbps (450Mbps each radio)450 Mbps
3x3 MIMO
RadiosDual radio, 5GHz 802.11ac and 2.4GHz 802.11n
indoor
Dual radio, 5GHz 802.11ac and 2.4GHz 802.11n
outdoor
Dual radios: Simultaneous operation in 2.4 and 5GHz band. (Concurrent operation of both radios in the same band is not supported.)Dual radio, 5‑GHz and 2.4‑GHz 802.11n 3x3:3
Operating frequencies2.4000 GHz to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.850 GHz
2.4000 GHz to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.875 GHz
2.4 to 2.5GHz, 5.150 to 5.950GHz with DFS support.2.4000 GHz to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.850 GHz
AntennasW-AP224: Three RP‑SMA connectors for external dual‑band antennas
W-AP225: Six integrated down‑tilt omni‑directional antennas for 3x3 MIMO with maximum antenna gain of 3.5 dBi in 2.4 GHz and 4.5 dBi in 5 GHz.
Built‑in antennas are optimized for horizontal ceiling mounted orientation of AP‑225
AP-274: Six N-type female connectors for external antennas
AP-275: Six integrated omni-directional antennas for 3x3 MIMO with maximum antenna gain of 5 dBi in 2.4 GHz and 5 dBi in 5 GHz. Built-in antennas are optimized for horizontal mounted orientation of AP-275.
W‑AP134: three RP‑SMA for external
dual‑band antennas
W‑AP135: six internal
omni‑directional, dual‑band
10/100/1000BASE‑T Ethernet network interface (RJ‑45)
Auto‑sensing link speed and MDI/MDX
802.3az Energy Efficient Ethernet (EEE)
PoE‑PD: 48 Vdc 802.3af PoE or 802.3at PoE+
Network interfacesTwo 10/100/1000BASE‑T Ethernet network interfaces (RJ‑45)
Auto‑sensing link speed and MDI/MDX
Load balancing statement TBD
MACSec encryption and 802.3az EEE
One PoE+ PD port 10/100/1000BASE-T Ethernet network
interface (RJ-45)
One port 10/100/1000BASE-T Ethernet network interface (RJ-45)
Two 100/1000Base‑T Ethernet Auto‑ sensing MDI/MDX. Supports MACSec Encryption, 802.3azDC power interface, accepts 1.7/4.0‑mm center‑positive circular plug with 9.5‑mm length
USB 2.0 host interface (Type A connector)
Serial console interface (RJ‑45, TTL levels)
Other interfacesDC power interface, accepts 1.7/4.0mm center‑positive circular
plug with 9.5mm length
USB 2.0 port (Type A connector)
Serial console interface (RJ45, TTL levels)
Serial console interface (micro USB)Console interface (RJ45)Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at‑compliant source
Power over Ethernet (PoE) interfacesPOE‑PD: 48 Vdc 802.3af POE or 802.3at POE+Power over Ethernet (PoE): 48 Vdc (nominal) 802.3at-compliant source48V DC 802.3af or 802.3at or PoE+ interoperable with intellisource PSE sourcing intelligence (both ports)
Power sources sold separately
Direct DC source: 12 Vdc nominal, +/‑ 5%
Power interfacesDirect DC source: 12 Vdc nominal, +/‑ 5%
Power over Ethernet (POE): 48 Vdc (nominal) 802.3af or 802.3at
compliant source
AC power interface; power cords sold separately12V DC, 1.25AMaximum power consumption: 13 watts, plus up to 2.5 watts for attached USB device.
Power consumption15W, plus up to 2.5W for attached
USB device.
23 watts15 Watts (maximum)
Environmental ClassIndoorOutdoor; Operating Altitude: 3000m; Chassis Rating: IP66 and IP67; Wind Survivability: Up to 165 mph; Shock and Vibration: ETSI 300-19-2-4 spec T41.E 4M3Indoor, plenum‑ratedIndoor
Operating temperatureTemperature: 0° C to +50° C (+32° F to +122° F)
Humidity: 5% to 95% non‑condensing
Temperature: -40° C to +65° C (-40° F to +150° F); Humidity: 5% to 95% non-condensing0°C to 50°C (32°F to 122°F)Temperature: 0° C to +50° C (+32° F to +122° F)
Humidity: 5% to 95% non‑condensing 0°C to 50°C (32°F to 122°F)


Regulatory Information:

Product Safety, EMC and Environmental Data Sheets
Dell Regulatory Compliance Home Page
Dell and the Environment

Models

W-AP175AC and
W-AP175P

W-AP104 and
W-AP105

 

W-AP103

W-AP92 and
W-AP93

W-AP93H+

Data rate600Mbps
(300Mbps each radio)
600Mbps
(300Mbps each radio)
300 Mbps
2x2 MIMO
802.11n
300Mbps300Mbps
RadiosDual radios:
2.4 and 5GHz
band
Dual radios:
2.4 and 5GHz
band
Dual radio,
5-GHz and
2.4-GHz 802.11n
2x2:2
Dual radios:
2.4 and 5GHz
band
Single radio:
2.4 or 5GHz
band
Operating
frequencies
N/AN/A2.4000 GHz to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.850 GHz
2.4-2.5 GHz2.4-2.5 GHz
AntennasFour N-type
interfaces
(two per band)
for external 2.4 and
5GHz antennas
W-AP104:
four RP-SMA for
external 2.4 and
5GHz antennas
W-AP105:
four internal
omni-directional,
dual-band
Four integrated
down-tilt
omni-directional
antennas for 2x2
MIMO with
maximum
antenna gain of
3.9 dBi at 2.44 GHz,
4.1 dBi at 5.2 GHz and
4.3 dBi at 5.8 GHz.
Built-in antennas are
optimized for
horizontal ceiling
mounted orientation
of the AP.
W-AP92:
two RP-SMA for
W-AP93 two
internal
omni-directional,
dual-band
Two internal
omni-directional,
dual-band
antennas
Network
interfaces
One 100/1000
Base-T Ethernet,
auto- sensing
MDI/MDX
One 100/1000
Base-T Ethernet,
auto- sensing
MDI/MDX
10/100/1000
BASE-T Ethernet
network interface
(RJ-45);
Auto-sensing
link speed and
MDI/MDX;
802.3az Energy
Efficient Ethernet
(EEE); PoE-PD:
48 Vdc (nominal)
802.3af PoE or
802.3at PoE+
One 100/1000
Base-T Ethernet,
auto- sensing
MDI/MDX
One 10/100/100/1000
Base-T
Ethernet,
auto-sensing
MDI/MDX,
Four 10/100Base-T,
and One passive
RJ-45 pass-through
interface (2 ports)
Other
interfaces
Console interface
(USB)
Console interface
(RJ45)
DC power
interface,
accepts 1.7/4.0-mm
center-positive
circular plug with
9.5-mm length;
Serial console
interface (proprietary;
optional adapter
cable available)
Console interface
(RJ45)
Console
interface (RJ45)
Power over
Ethernet (PoE)
interfaces
W-AP175P:
802.3at-compatible
PoE input (PD)
W-AP175AC and
W-AP175DC:
802.3af
compatible PoE
output (PSE)
W-AP175P:
802.3at-compatible
PoE input (PD)
W-AP175AC and
W-AP175DC:
802.3af
compatible PoE
output (PSE)
Power over
Ethernet (PoE):
48 Vdc (nominal)
802.3af or
802.3at-compliant
source
48V DC 802.3af-
compatible
48V DC 802.3af-
compatible
Power interfaces12–48V DC or
100–240V AC
48V DC 802.3af-
compatible
Direct DC source:
12 Vdc nominal, +/- 5%
12V DC, 1.25A12V DC, 1.25A
Power consumption18 Watts
(maximum)
12V DC, 1.25A
12.5 Watts (maximum)
Max 9.5W (POE)
or 8W (DC)
10 Watts
(maximum)
9 Watts (maximum)
Environmental ClassOutdoorIndoor,
plenum-rated
IndoorIndoor,
plenum-rated
Indoor
Operating temperatureW-IAP175P:
–30°C to +60°C
(–22°Fto +140°F)
W-IAP175AC
and W-IAP175DC:
–40°C to +55°C
(–40°F to 131°F)
0°C to 50°C
(32°F to 122°F)
 0° C to +40° C
(+32° F to +104° F)
0°C to 50°C
(32°F to 122°F)
0°C to 40°C
(32°F to 104°F)


Regulatory Information:

Product Safety, EMC and Environmental Data Sheets
Dell Regulatory Compliance Home Page
Dell and the Environment
Deploy wire-like performance
Deploy wire-like performance
Blur the lines between wired and wireless performance with up to 450 Mbps data rate per radio, and help ensure fast and clear client performance with intuitive network resources allocation and spectrum analysis capabilities.
Find Out More

Provide outstanding audio and video quality
Maintain high‑definition (HD)‑quality video and toll‑quality voice across your wireless infrastructure with Dell Networking W‑Series access points (W‑APs) and centralized controllers.
Find Out More

Implement context-aware access policies.
Provide differentiated access policy based on type of user, type of device being used, type of application being run, time and end‑user location.
Find Out More

Confidently manage your WiFi networks
Confidently manage your WiFi networks
Securely administer Dell Networking W‑AP WiFi network from a controller. In addition, use Dell Networking W‑Series AirWave Software Management Suite to manage your networks
Find Out More

Enhanced RF management
Build wireless networks that adjust to the RF environment. Dell Networking W‑APs with Dell’s Adaptive Radio Management (ARM) technology ensure maximum client performance while enhancing stability and predictability of the entire WiFi network.
Find Out More
PowerConnect-W-ControllersSelect Networking products carry an Extended Life Warranty with Basic Hardware Service, covering repair or replacement of the product for as long as it remains in use by the customer. In the event of discontinuance of product manufacture, Dell Extended Life Warranty extends until five (5) years after end of product model sales. For more information, visit dell.com/warranty.
PowerConnect-W-ControllersChoose Dell’s premium support service, ProSupport, for 24/7 direct telephone and online access* to advanced-level technicians based in your region. Whether you have one office or hundreds around the world, protect your investments with this simple yet flexible approach.
PowerConnect-W-ControllersWhether you’re looking for payment flexibility to spread IT costs over several budget cycles or you need a scalable financial solution to accommodate your changing technology needs, Dell Financial Services has a wide range of contracting options designed to make technology acquisition easy and affordable. Contact your Dell account manager or DFS representative to learn how financing can help you maximize ROI and lower TCO.
close
 
 
CS04