Gain SSD performance and HDD capacity in one iSCSI array
Experience SSD low-latency performance with spinning media HDD capacity in one storage solution with the Dell™ EqualLogic™ PS6100XS iSCSI array.
Environmental Operating Conditions
- Temperature range: 5° to 40°C (41° to 104°F)
Storage temperature: –40° to 65°C (–40° to 149°F)
Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft.
Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation
of 10% per hour
Operational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only
Operating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations
Acoustics Category 4: <=7.2 bels at 23C +/- 2C
Air Quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985
- AC voltage: 100-240 VAC ±10% single phase, 700 W (max, total), +5V up to 155W; +12V up to 624W; +5Vsb up to 10W
Frequency: 50/60 Hz
Power factor: 0.98 (minimum)
Power supplies: Dual 700 W
- Dell Storage Manager (DSM): Allows you to perform day-to-day tasks across SC and PS Series arrays from a single management interface*
PS Series Group Manager
SAN Headquarters multi-group performance and event monitoring tool
Ability to configure a separate management network
SNMP, telnet, SSH, HTTP, Web (SSL), host scripting
- Height: 2U / 87 mm (3.42 inches)
Width: 446 mm (17.57 inches)
Depth: 561 mm (22.09 inches)
Weight: 24.2 kg (53.4 lbs)
Packaged physical: Length: 851 mm (33.50 inches) Width: 629 mm (24.75 inches) Depth: 395 mm (15.56 inches)
Packaged weight: 29.48 kg (65.00 lbs)
ReadyRails™ II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racks
- Redundant hot-swappable controllers with vertical port sharing
Hot-swappable disks and power supplies
- SNMP traps, e-mail, syslog
Up to 1,024
512 per volume / up to 10,000 total per group
Up to 1,024
Any standards-compliant iSCSI initiator
Operating Systems Supported
Microsoft® Windows Server® including Hyper-V®
VMware® ESX Server™
Red Hat® Enterprise Linux® (RHEL)
SUSE® Enterprise Linux® (SLES)
For a complete list of supported OS versions including software initiators, NICs/CNAs, and HBAs, see the Dell Storage Compatibility Matrix: http://en.community.dell.com/dell-groups/dtcmedia/m/mediagallery/20438558.
RAID 5, RAID 6, RAID 10, and RAID 50*
GbE Network Interfaces
Management network: One 100BASE-TX dedicated management port per controller
Interface ports: Four 1000BASE-T ports per controller
TCP Network Support
IPv4, IPv6 compliant. USGv6 certified.
Can be combined with other PS Series arrays in the same SAN group, online. Up to 16 total members per group. Additionally, PS and SC Series offer common management and cross-platform replication capabilities between arrays, providing PS Series customers the flexibility to add SC Series arrays to their environment, if and when they choose.*
- Storage Controllers
Dual controllers with 4GB non-volatile memory per controller
Hard Disk Drives
Seven (7) hot-pluggable Solid State Disk (SSD) drives and Seventeen (17) hot-pluggable SAS hard disk drives
Combines 2.5” 400GB and 800GB SSDs and 2.5” 600GB and 1.2TB 10K SAS drives.
Up to 26TB
Enclosure Monitoring System
- Automatic spare configuration and utilization
Automatic bad block replacement
Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drive
Designed to scale with your business
Choose your array
Add extensive versatility to your enterprise storage needs using PS6100XS arrays. Combining seven SSDs with 17 HDDs into a single solution, the PS6100XS GbE iSCSI array adds a great deal of storage flexibility to your enterprise.
The PS6100 Series family features:
- Dual controllers designed for built-in redundancy
- Four GbE ports per controller
- Dedicated 10/100 management port per controller
- 6G SAS backplane
- 24 hot-swappable drives
- 7.2K NL-SAS, 10K SAS, or 15K SAS drives or solid-state drives (SSDs)
- Cache-to-flash memory de-staging
- Peer-scaling architecture that scales performance linearly
- Vertical Port Failover, designed to enable you to maintain full bandwidth if a networking port fails
- Group Manager, which integrates all management into one console for both file- and block-storage protocols
- Array firmware and host software with no additional licenses or fees
Enterprise power with everyday simplicityDell Storage PS Series software helps you store and manage your data more efficiently and cost-effectively. PS Series array, host and management software are included in your storage array purchase — virtually all the tools your organization needs for a complete solution. PS Series software virtualizes and simplifies your environment to help protect business-critical data, optimize storage performance and streamline operations. Additionally, the latest SC and PS Series software releases offer common management and cross-platform replication capabilities between SC and PS Series storage arrays, allowing you to take advantage of new functionality while leveraging existing investments.
Simplified management and data protection deliver lasting valueDell Storage PS Series Array Software, including PS Series Firmware, Group Manager and the Manual Transfer Utility, delivers advanced Storage Area Network (SAN) functions that automatically virtualize and optimize storage resources while providing advanced data protection and SAN management. Integrated across the entire family of PS Series arrays, the PS Series Firmware is a SAN operating system based on a unique peer storage architecture that automatically adjusts system resources. In addition, Dell Storage Update Manager simplifies the firmware upgrade process.
Advanced cross-platform capabilities and streamlined managementIf you are adding an SC Series array to your environment, Dell Storage Manager (DSM) provides a common management tool for PS and SC Series day-to-day activities. You can also initiate volume replication between PS and SC Series with DSM, and easily configure and monitor replication task. To simplify migration, you can import data from PS to SC Series using the Thin Import feature.*
Data center automation with integration and monitoring toolsThis family of host-based software provides tight integration between the PS Series array and the host. Dell Storage PS Series Host Integration Tools (HIT) for Microsoft®, VMware® and Linux® environments offer comprehensive data protection and reliable performance.
Dell Storage PS Series SAN Headquarters (SAN HQ) is a centralized monitoring and reporting tool that gathers and provides in-depth performance and capacity information and provides alerts across multiple groups of PS Series arrays. SAN HQ with SupportAssist further streamlines management and improves productivity with automatic case creation and case tracking.
End-to-end servicesDell offers a wide range of professional services and tools to simplify the assessment, design, implementation, management and maintenance of your PS Series environment, including Dell ProSupport and SupportAssist.
Dell Services storage experts go beyond everyday administration to help you improve the performance and utilization of your Dell Storage systems. The Dell Storage Services portfolio provides system installation and implementation as well as training. From disaster recovery planning to physical relocation, the Dell Services team is available to provide professional assistance when you need it.
Comprehensive, proactive supportWith Dell ProSupport, you get the most out of your investment with the support expertise and insights Dell is known for across the globe. Dell ProSupport doesn’t just extend your IT team, it offers a single point of contact for all your hardware and software issues. Innovative tools like SupportAssist offer proactive issue notification and automated case creation to help streamline your support experience.
We recommend Dell ProSupport Plus with SupportAssist for mission-critical systems or Dell ProSupport for comprehensive hardware and software support for your Dell Storage PS Series solution. Contact your Dell representative today for more information*.
Implement fast. Implement correctly. Implement once.Dell ProDeploy Enterprise Suite* can reduce costs and relieve your IT department of time-consuming implementation tasks that otherwise divert valuable IT resources from business-critical activities. We bring two unmatched values to every Dell Storage implementation: deep knowledge of our products and broad experience from performing thousands of deployments every year, in just about every type of customer environment. Choose ProDeploy Plus for the most complete deployment offer available in the market, ProDeploy for expert configuration and installations, or Basic Deployment for worry-free hardware installations.
Start on the right path with Dell Education ServicesGain the skills and knowledge necessary to simplify administration, optimize resources and improve disaster recovery with Dell Storage training. Choose from online courses designed to introduce Dell Storage to hands-on training that dive into the advanced features and best practices to prepare for a successful implementation right from the start. Learn more about the right classes for your organization.
Transform your data centerDell Storage Consulting Services can help you meet your complex storage infrastructure and data management needs while optimizing resources and budgets. Consulting services can help with:
• Storage infrastructure consolidation and risk-managed migration for both PS and SC Series systems
• Storage infrastructure optimization for virtual environments
• Data protection process development and backup/restore policies
• Data archiving to address long-term data retention, access and regulatory compliance
• Classification and categorization of data for storage tiering and archival
• Storage high availability and disaster recovery planning, design and implementation