|

EqualLogic PS4110XV 3.5” 10GbE iSCSI Array

intel® xeon™
Open

Affordable speed and capacity for the enterprise

Enhance your enterprise data center with the 10GbE performance, high capacity and cost-effectiveness of Dell™ EqualLogic™ PS4110XV 3.5” 10GbE iSCSI arrays.

 
 

 

 

Product Configurations

  • Storage Controllers
    Dual controllers with 4GB non-volatile memory per controller

    Hard Disk Drives
    Twelve (12) 15K SAS hot-pluggable hard drives.

    Drive Capacities
    3.5" 15K RPM SAS drives available in 600GB*

    System Capacities
    7.2TB* using twelve (12) 600GB 15K SAS disk drives

Technical Highlights

  • Volumes
    Up to 256

    Snapshots
    128 per volume / up to 2,048 total per group

    Volume Connections
    Up to 512 per pool / 1024 per group

    Host Protocol
    Any standards-compliant iSCSI initiator

    Operating Systems Supported

    Microsoft® Windows Server® including Hyper-V®
    VMware® ESX Server™
    Red Hat® Enterprise Linux® (RHEL)
    SUSE® Enterprise Linux® (SLES)
    Oracle® Linux
    Oracle® Solaris™
    IBM® AIX®
    HP-UX
    Mac OS® X
    Citrix® XenServer®
    Novell® NetWare®

    For a complete list of supported OS versions including software initiators, NICs/CNAs, and HBAs, see the EqualLogic Compatibility Matrix on http://en.community.dell.com/techcenter/storage/w/wiki/2661.equallogic-compatibility-matrix-07262013.aspx.
     
    RAID Support
    RAID 5, RAID 6, RAID 10, and RAID 50*

    10GbE Network Interfaces
    Management network: One 100BASE-TX dedicated management port per controller
    Interface ports: One 10GBASE-T with RJ45 and one 10GbE SFP+ for fibre or twin-ax copper cabling per controller

    TCP Network Support
    IPv4, IPv6 core support

    Expansion Option
    Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. A maximum of two (2) PS4xx0 arrays can be in a group.

Reliability

  • Redundant hot-swappable controllers with vertical port sharing
    Hot-swappable disks and power supplies

Enclosure Monitoring System

  • Automatic spare configuration and utilization
    SMART
    Automatic bad block replacement
    Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drives

Management

  • SAN Headquarters multi-group performance and event monitoring tool
    Serial console
    Ability to configure a separate management network
    SNMP, telnet, SSH, HTTP, Web (SSL), host scripting
    Multi-administrator support

Security

  • CHAP authentication
    Access control for iSCSI
    Access control for management interfaces including RADIUS support

Notification Methods

  • SNMP traps, e-mail, syslog

Power

  • AC voltage: 100-240 VAC ±10% single phase
    700 W (max, total), +5V up to 155W; +12V up to 624W; +5Vsb up to 10W
    Frequency: 50/60 Hz
    Power factor: 0.98 (minimum)
    Power supplies: Dual 700 W

Chassis

  • Height: 2U / 87 mm (3.42 inches)
    Width: 446 mm (17.57 inches)
    Depth: 600 mm (23.62 inches)
    Weight: 29.3 kg (64.6 lbs)

    Packaged physical: Length: 851 mm (33.50 inches) Width: 629 mm (24.75 inches) Depth: 395 mm (15.56 inches)
    Packaged weight: 39.54 Kg (87.17 lb)

    Rack Support
    ReadyRails™ II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racks

Environmental Operating Conditions

  • Temperature range: 5° to 40°C (41° to 104°F)
    Storage temperature: –40° to 65°C (–40° to 149°F)
    Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft.
    Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation of 10% per hour
    Shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only
    Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations
    Acoustics Category 4: <=7.2 bels at 23C +/- 2C
    Air Quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985

Regulatory

Software and Services for a complete SAN solution

Dell delivers comprehensive end-to-end solutions with software and services options to help you store and manage your data more efficiently and cost-effectively. Included with your PS Series array purchase are the EqualLogic™ array software and host software — virtually all the tools your organization needs for a complete solution.
equallogic ps4210 storage

EqualLogic Array Software

  • EqualLogic Group Manager helps to streamline storage and data management.
  • EqualLogic Manual Transfer Utility minimizes downtime when transferring large amounts of data.
  • EqualLogic PS Series Firmware is the foundation of the EqualLogic software family.
  • Dell Storage Update Manager simplifies the upgrade process with guided update management.

Integrated across the entire family of EqualLogic PS arrays, the EqualLogic Firmware is a SAN operating system based on a unique peer storage architecture that:

  • Virtualizes SAN resources
  • Enables peer scalability of up to 16 arrays
  • Provides intelligent data management functionality
  • Automatically adjusts system resources
  • Optimizes performance

EqualLogic Host Integration Tools

This family of host-based software provides tight integration between the PS Series array and the host. Dell provides host integration tools for Microsoft®, VMware® and Linux® environments to offer comprehensive data protection and reliable performance.

EqualLogic SAN Headquarters

Dell EqualLogic SAN Headquarters (SAN HQ) is a centralized monitoring and reporting tool that gathers and provides in-depth information on performance and capacity and provides alerts across multiple groups of PS Series arrays. SAN HQ with Support Assist further streamlines management and improves productivity with automatic case creation and case tracking.

More information on EqualLogic Software can be found here.

 You can only compare up to 7 products. To compare this item, deselect one of the other 7 products.
close
 
 
CS04