|

Help Me Choose

Help Me Choose: Memory

HMC 12G memory
PowerEdge 12th-generation servers are very modular by nature, and you can now choose the exact quantity and type of DIMMs for your system.

To configure your system’s memory for optimal performance, keep these 6 best practices in mind:

1. Populate all memory channels evenly with the same rank, size, and speed of DIMMs. For situations that demand mixing DIMM sizes, all memory should be chosen based on identical rank structure, and all memory channels should be populated with an identical mix of DIMM types.
2. Choose the appropriate processor to support the expected memory frequency. For example, if your workload requires a memory speed of 1600MT/s, select a processor model that supports this speed.
3. For most system configurations, 1 DIMM per channel (DPC) and 2 DPC memory configurations perform better than 3 DPC because that memory frequency will be reduced when all slots in a given memory channel are populated.
4. Choose the Optimizer memory operating mode, which is part of the system profile, instead of Advanced ECC due to the significant performance penalties implicit in running the memory in this RAS mode.
5. Choose LRDIMMs when the greatest capacity and performance of memory is desired. Choose RDIMMs for a balanced approach to memory capacity, performance and cost. Choose UDIMMs when using less power is a premium over capacity.
6. Choose the 1600MT/s memory frequency over 1333MT/s for high performance computing workloads that are sensitive to memory bandwidth limitations.

If you’d like more guidance on configuring your system’s memory, try our Processor and Memory Selector  tool.
Memory Configuration Type
Reduce data loss and keep your system online and operational with reliability, availability and serviceability (RAS) features for Dell servers and storage, including:

High-reliability profile, which helps increase memory reliability through a selectable profile that adjusts parameters to reduce faults associated with speed, temperature, voltage and refresh rates. High reliability profile has a minor impact on power consumption and performance.

Memory mirroring has two adjacent memory channels configured to write the same data to each channel. If one memory channel fails or encounters an error, the other channel continues to transmit data. It’s an excellent safeguard for systems requiring uninterrupted operation, though it cuts memory capacity in half, doubles the cost per gigabyte, and can increase power consumption.

Memory sparing can reduce downtime from correctable errors by allocating one rank (64-bit wide data area on a DIMM) per channel as a spare. If a correctable error occurs in a rank or channel, it’s moved to the spare rank while the OS is running. This prevents the error from causing a failure. Memory sparing reduces memory capacity by one rank per channel and increases the cost per gigabyte.

DIMM Type
Choose from three different dual in-line memory module types or Dimm types that can meet your needs depending on how your prioritize R.A.S. (reliability, availability, and serviceability) and power consumption.

Dell is supporting three DIMM types on the twelfth-generation servers:
  • UDIMM: Unbuffered DIMM – Provides lowest possible power and latency.
  • RDIMM: Registered DIMM – Provides for higher capacity options and advanced RAS features.
  • LRDIMM: Load Reduced DIMM – Provides maximum capacity but higher power consumption.

RDIMM, or registered memory, is the most commonly used DIMM type, and offers the best mix of frequency, capacity, and rank structure choices. It provides high signal integrity — performing parity checking to detect improper addresses or commands — and increased performance for heavy workloads. RDIMMs experience slightly increased latency and power consumption over UDIMMs due to the onboard register.


RDIMMs
(Single Rank and Dual Rank)

  • Maximum frequency of 1600 MT/s
  • Maximum capacity of 16GB per DIMM
  • Maximum system capacity of 512GB


RDIMMs
(Quad Rank)

  • Maximum frequency of 1066MT/s
  • Maximum capacity of 32GB per DIMM
  • Maximum of 2 DIMMs per channel
  • Maximum system capacity of 512GB


UDIMM,
or unbuffered memory, is a low-density, low-latency DIMM that doesn’t include a register or a buffer chip. It can offer some minor latency and power advantages in limited cases.

UDIMMs

  • Maximum frequency of 1600MT/s
  • Maximum capacity of 4GB per DIMM
  • Maximum of 2 DIMMs per channel
  • Maximum system capacity of 64GB


LRDIMM
, or load-reduced memory, uses a buffer to reduce memory loading to a single load on all DDR signals, allowing for greater density.

LRDIMMs

  • Maximum frequency of 1333MT/s
  • Maximum frequency using 3 DIMMs per channel of 1066MT/s
  • Maximum capacity of 32GB per DIMM
  • Maximum system capacity of 768GB

DIMM Speed

There are two speed options:
  • 1333MT/s – DIMMS may run at 1.35 volt or 1.5 volt
  • 1600MT/s – DIMMS may run at 1.35 volt or 1.5 volt

1866MT/s – DIMMS will run at 1.5 volt and are supported with Intel® Xeon® 2600 v2 product family only

RAS Feature

RAS feature options offered on the twelfth-generation servers:
  • Memory Optimized – Baseline RAS features for highest performance optimization
  • Advanced ECC - RAS Feature that extends multi-bit single device error correction to x8 DRAMs
  • Memory Sparing- RAS feature that allocates one rank per channel as a spare to reduce the likelihood of correctable errors from becoming uncorrectable errors but available memory capacity is reduced
  • Memory Mirroring – RAS Feature with paired memory provides data and transmission fault-tolerance but available memory capacity is reduced by 50%
  • Dell Fault Resilient Memory (FRM) - This Dell-patented technology enables PowerEdge 12th generation server customers supporting VMware vSphere 5.5 to maximize available server memory while increasing protection against memory faults for the hypervisor and mission critical applications.
For more information on memory, please refer to our memory page at www.dell.com/poweredge/memory 

The memory offerings for Dell PowerEdge 12th-generation servers are based on the double-data rate type 3 (DDR3L) standard that allows the memory to operate at the lowest possible voltage of either 1.35 volts or 1.5 volts.

Standard Voltage (SV) DDR3 operates at 1.5 volts, which is currently required for 1600 million transfers per second (MT/s).

Low Voltage (LV) DDR3 operates at 1.35 volts or 1.5 volts. At 1.35 volts, the memory can consume less power and reduce heat, but can still be boosted to 1.5 volts when the memory channel requires additional voltage to help maintain maximum speed. All of the standard processors support a maximum memory frequency of 1333MT/s. T

PowerEdge memory speeds by type and loading

 DIMM Type  DIMM Ranking DIMM Rated Voltage, Speed 12th Generation Memory (EP, 3DPC Platforms) *DPC Means DIMMs per channel
 1 DPC2 DPC 3 DPC
 1.35V 1.5V  1.35V1.5V  1.35V1.5V 
RDIMM1R/2RDDR3 (1.5V),1866186618661333
RDIMM1R/2RDDR3L (1.35V/1.5V),16001600160016001600 10661333
UDIMM1R/2RDDR3L (1.35V/1.5V),16001600160016001600
RDIMM4RDDR3L (1.35V/1.5V),13331066133310661066
LRDIMM4RDDR3 (1.5V),18661866 1600 1333*
LRDIMM 4RDDR3L (1.35V/1.5V),1600 160016001600 16001066 1333*

  • Green boxes are defaults for performance per watt.
  • White boxes (with lower voltage) can be chosen to save power but run slower.
  • White boxes (with higher voltage) can be configured via system profiles in the BIOS setup.

*For PowerEdge T620, the speed will clock down to 1066MT/s

  • Green boxes are defaults for performance/performance per watt system profiles
  • White boxes (with lower voltage) can be chosen to save power but run slower
  • White boxes (with higher voltage) can be chosen through custom configuration in the BIOS

For more information on memory, please refer to our memory page at www.dell.com/poweredge/memory 

The table below lists the comparison between different DIMM types.

DIMM Comparison

U DIMM R DIMM LR DIMM
Registered/Buffered NoAddress only Address and data
Frequency/Speed 1600MT/s1333, 1600, 1866MT/s 1333, 1600, 1866MT/s
Ranks Supported 1 or 2 1, 2 or 4 4 only
Capacity per DIMM 2 and 4GB 2, 4, 8, 16 and 32GB 32GB
Maximum DIMM per Channel 2 3 (except for 32GB) 3
Dynamic RAM (DRAM) Technology x8 x4 and x8 x4
Temperature Sensor YesYesYes
Error-Correction Code (ECC) YesYesYes
Single Device Data Correction (SDDC) Yes
(requires Advanced ECC mode)
Yes
(x8 requires Advanced ECC mode)
Yes
Advanced ECCYesYesYes
Address Parity No YesYes

For more information on memory, please refer to our memory page at www.dell.com/poweredge/memory