Up to 256
128 per volume / up to 2,048 total per group
Up to 512 per pool / 1024 per group
Any standards-compliant iSCSI initiator
Operating Systems Supported
Microsoft® Windows Server® including Hyper-V®
VMware® ESX Server™
Red Hat® Enterprise Linux® (RHEL)
SUSE® Enterprise Linux® (SLES)
Mac OS® X
For a complete list of supported OS versions including software initiators, NICs/CNAs, and HBAs, see the EqualLogic Compatibility Matrix on http://en.community.dell.com/techcenter/storage/w/wiki/2661.equallogic-compatibility-matrix-07262013.aspx.
RAID 5, RAID 6, RAID 10, and RAID 50*
10GbE Network Interfaces
Management network: One 100BASE-TX dedicated management port per controller
Interface ports: One 10GBASE-T with RJ45 and one 10GbE SFP+ for fibre or twin-ax copper cabling per controller
TCP Network Support
IPv4, IPv6 core support
Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. A maximum of two (2) PS4xx0 arrays can be in a group.
- Redundant hot-swappable controllers with vertical port sharing
Hot-swappable disks and power supplies
Enclosure Monitoring System
- Automatic spare configuration and utilization
Automatic bad block replacement
Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drives
- SAN Headquarters multi-group performance and event monitoring tool
Ability to configure a separate management network
SNMP, telnet, SSH, HTTP, Web (SSL), host scripting
- CHAP authentication
Access control for iSCSI
Access control for management interfaces including RADIUS support
- SNMP traps, e-mail, syslog
- AC voltage: 100-240 VAC ±10% single phase
700 W (max, total), +5V up to 155W; +12V up to 624W; +5Vsb up to 10W
Frequency: 50/60 Hz
Power factor: 0.98 (minimum)
Power supplies: Dual 700 W
- Height: 2U / 87 mm (3.42 inches)
Width: 446 mm (17.57 inches)
Depth: 600 mm (23.62 inches)
Weight: 29.3 kg (64.6 lbs)
Packaged physical: Length: 851 mm (33.50 inches) Width: 629 mm (24.75 inches) Depth: 395 mm (15.56 inches)
Packaged weight: 39.54 Kg (87.17 lb)
ReadyRails™ II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racks
Environmental Operating Conditions
- Temperature range: 5° to 40°C (41° to 104°F)
Storage temperature: –40° to 65°C (–40° to 149°F)
Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft.
Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation of 10% per hour
Shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only
Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations
Acoustics Category 4: <=7.2 bels at 23C +/- 2C
Air Quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985
Software and Services for a complete SAN solutionDell delivers comprehensive end-to-end solutions with software and services options to help you store and manage your data more efficiently and cost-effectively. Included with your PS Series array purchase are the EqualLogic™ array software and host software — virtually all the tools your organization needs for a complete solution.
EqualLogic Array Software
- EqualLogic Group Manager helps to streamline storage and data management.
- EqualLogic Manual Transfer Utility minimizes downtime when transferring large amounts of data.
- EqualLogic PS Series Firmware is the foundation of the EqualLogic software family.
- Dell Storage Update Manager simplifies the upgrade process with guided update management.
Integrated across the entire family of EqualLogic PS arrays, the EqualLogic Firmware is a SAN operating system based on a unique peer storage architecture that:
- Virtualizes SAN resources
- Enables peer scalability of up to 16 arrays
- Provides intelligent data management functionality
- Automatically adjusts system resources
- Optimizes performance
EqualLogic Host Integration Tools
This family of host-based software provides tight integration between the PS Series array and the host. Dell provides host integration tools for Microsoft®, VMware® and Linux® environments to offer comprehensive data protection and reliable performance.
EqualLogic SAN Headquarters
Dell EqualLogic SAN Headquarters (SAN HQ) is a centralized monitoring and reporting tool that gathers and provides in-depth information on performance and capacity and provides alerts across multiple groups of PS Series arrays. SAN HQ with Support Assist further streamlines management and improves productivity with automatic case creation and case tracking.