PowerConnect 2824 Switch

Are loc următoarea revoluţie industrială. Tehnologia nu va domina lumea, dar o va alimenta. Vedeţi cum› (În limba engleză)

Organizaţiile care au nevoie de un switch cu 24 de porturi care să ofere un raport excepţional calitate-preţ, capacităţi flexibile de administrare şi soluţii eficiente de reducere a consumului de energie.

Dell PowerConnect 2824 Switch


Atribute porturi

  • 24 10/100/1000BASE-T auto-sensing Gigabit Ethernet switching ports
    2 SFP fiber combo ports provide support for 1000BASE-SX and 1000BASE-LX transceivers
    Power reduction for short cables or inactive connections
    Auto-negotiation for speed, duplex mode and flow control
    Integrated LEDs for improved visual monitoring and analysis
    Supports Virtual Cable Diagnostics by Marvell™ and fiber transceiver diagnostics to provide advanced troubleshooting capabilities for your cable infrastructure


  • Switch Fabric Capacity up to 48 Gbps
    Forwarding Rate 35.6 Mpps
    Up to 8,000 MAC Addresses
    2Mbits of Packet Buffer Memory


  • Supports up to 64 port-based VLANs

Calitatea serviciului

  • Delivers 4 priority queues per port
    Honor 802.1p values and honor IP DSCP values
    Supports strict priority and configurable Weighted Round Robin (WRR) scheduling across queues

Alte switch-uri

  • Link Aggregation:

    Industry-standard link aggregation adhering to IEEE 802.3ad standards (static support only, LACP not supported)
    Supports 4 link aggregation groups and up to 4 ports per group


  • Local password and restricted IP addresses for secure access to the switch
    Port mirroring provides the capability of mirroring four source ports to improve network traffic monitoring and troubleshooting
    Internal DHCP Server
    DHCP client support allows for simplified IP address assignment when used with a DHCP server
    Switch software can be easily uploaded to the switch through the web-management interface
    Configurations can be easily uploaded to and from the switch through the intuitive web-management interface
    Port statistics available through industry-standard RMON
    Switch is factory-configured as an unmanaged switch, but can be easily configured as a web-managed switch with the push of a button
    Jumbo frame support for packets up to 9000 bytes
    Broadcast storm control to help eliminate network traffic storms
    Limited SNMP monitoring and CLI management – See User Guide for details


  • 42 x 330 x 230.5 mm (H x W x D) (1.65 x 13.0 x 9.1 in.)
    1U, rack-mounting kit included
    Unit Weight: 5.5 lbs
    Fan: 1 (rear)

Standarde acceptate

  • IEEE 802.3ac - VLAN Tagging
    IEEE 802.3ad - Link Aggregation with Static LAG support
    IEEE 802.1W - Rapid Spanning Tree (1)
    IEEE 802.1D - Spanning Tree (1)
    IEEE 802.1Q - Virtual LANs with Port Based VLANs
    IEEE 802.1v - Protocol based VLANs
    IEEE 802.1p - Ethernet Priority with User Provisioning & Mapping
    IEEE 802.1X - Port Authentication
    EEE 802.3x - Flow Control
    RFC 826 - ARP
    RFC 854 - Telnet
    RFC 855 - Telnet Option
    RFC 1155 - SMI v1
    RFC 1157 - SNMP
    RFC 1213 – MIB II - Updated by RFC’s 2011, 2012 and 2013
    RFC 2579 - Textual Conventions for SMI v2
    RFC 2580 - Conformance statements for SMI v2
    RFC 2819 – RMON
    RFC 3164 - BSD Syslog Protocol
    RFC 3416 - Management Information Base (MIB) for the Simple Network Management Protocol (SNMP) (December 2002).I
    RFC 768 - UDP
    RFC 783 - TFTP
    RFC 791 - IP
    RFC 792 - ICMP
    RFC 793 - TCP
    RFC 951 - BOOTP
    RFC 1533 – including 1534, Interoperation between BOOTP and DHCP
    DHCP Server
    RFC 2131 - Dynamic Host Configuration Protocol
    RFC 2132 - DHCP Options and BootP vendor Extensions
    RFC 950 - Internet Standard subnetting procedure
    RFC 1123 - Requirements for Internet Hosts
    RFC 1042 - A Standards for transmission of IP datagrams over IEEE 802 Networks
    RFC 1071 - Computing the Internet Checksum
    IGMPv2 snooping
    GMP Snooping
    Jumbo Frames
    IPv6 Classification APIs
    XMODEM – (all models other than 2808)

Condiţii de mediu pentru funcţionare

  • 100% Lead-Free
    Operating Temperature: 0º C to 45º C (32º F to 113º F)
    Storage Temperature: -20º C to 70º C (-4º F to 158º F)
    Operating Relative Humidity: 10% to 90% non-condensing
    Storage Relative Humidity: 10% to 95% non-condensing


  • 1.0A @ 100V
    95.5 BTU/hr
 Puteţi compara doar cel mult 7 produse. Pentru a include acest produs în comparaţie, debifaţi unul dintre celelalte 7.