|

Dell PowerEdge M610 Blade Server

intel® core™ processors
We're here to help. Contact a Dell expert ›

Dell PowerEdge M610

The PowerEdge™ M610 is an Intel® processor-based 2-socket, half-height blade server built for virtualisation, mainstream business applications and front-end database workloads.

 
PowerEdge M610 Server
Gallery

Gallery

Features

Features

Video

PowerEdge M610 Blade Server Video

 

Processor

  • Intel® Xeon® 5500 and 5600 series processors

Chipset

  • Intel® 5520

Memory*

  • 12 DIMM slots
    1GB/2GB/4GB/8GB ECC DDR3
    Support up to 192GB* using 12 x 16GB DIMMs

Embedded Hypervisor (Optional)

  • Citrix® XenServer®
    Microsoft® Windows Server® 2008, with Hyper-V™
    VMware® vSphere™ 4.1 (including VMware ESX® 4.1 or VMware ESXi™ 4.1)

Storage

  • Hot-plug Hard Drive Options:
    2.5" SAS SSD, SATA SSD, SAS (15K, 10K), nearline SAS (7.2K), SATA (7.2K)

Drive Bays

  • Two 6 cm (2.5") SAS/Solid State Hot-Swappable Drives
    6 cm (2.5") 500GB SATA
    9 cm (3.5") 2.0TB SATA

RAID Controllers

  • Internal:
    PERC H200 Modular (6Gb/s)
    PERC H700 Modular (6Gb/s) with 512MB battery-backed cache; 512MB, 1G Non-Volatile battery-backed cache
    SAS 6/iR Modular
    CERC 6/i Modular
    PERC 6/i Modular with 256MB battery-backed cache

Communications

  • Two embedded Broadcom® NetXtreme II™ 5709 Gigabit Ethernet NICs with failover and load balancing TOE (TCPIP Offload Engine) supported on Microsoft® Windows Server 2003, SP1 or higher with Scalable Networking Pack. iSCSI Offload supported on Microsoft Windows Server 2008, Microsoft Windows Server 2003 SP1 or higher, Red Hat® Linux® Enterprise 5, and SUSE LINUX Enterprise Server 10. Scalable Networking Pack for Microsoft Windows Server 2003 is not required.

    Boot from SAN (iSCSI and FC) supported

    Optional add-in NICs:


    Dual Port 10GB Enhanced Intel Ethernet Server Adapter X520-DA2 (FcoE Ready for Future Enablement)
    See I/O Mezzanine Card Options
    Intel® Gigabit ET Dual Port Server Adapter
    Intel® Gigabit ET Quad Port Server Adapter
    Brocade® BR1741M-k Dual-Port Mezzanine CNA
    Emulex® 8 or 4 Gb/s Fibre Channel Pass-Through Module

    Optional add in HBAs:

    See I/O Mezzanine Card Options

    Fully populated mezz card slots and switch modules will yield 3 highly available, redundant I/O fabrics for each blade.

Power

  • Supplied by Dell’s M1000e Blade Chassis

Video Card

  • Matrox G200

Chassis

  • The PowerEdge M610 blade server fits in the M1000e blade enclosure. A total of 8 full-height or 16 half-height blades can fit into every M1000e enclosure. Full height and half height blades can be mixed in M1000e enclosures with no limitations.

    M610 Dimensions and Weight (blade only):

    Height: 18.9 cm (7.4 in)

    Width: 5 cm (2 in)

    Depth: 48.6 cm (19.2 in)

    Weight (Maximum Configuration): 5.2-6.4 kg (11.5-14.0 lb)    
        
    Full height blade fits inside the M1000e Blade Enclosure  
      
    Maximum of 8 per blade chassis

Management

  • Dell™ OpenManage™ featuring Dell Management Console
    Unified Server Configurator Lifecycle Controller
    BMC, IPMI2.0 compliant
    iDRAC6 Enterprise with optional vFlash
    Remote Management: iDRAC6 Enterprise with optional vFlash

close
 
 
CS05